WILIER frameset Road 0 SLR Disc | black gray
Wilier Triestina, based in the beautiful Veneto region on the southern edge of the Alps, has stood for high-quality bicycle construction for over 100 years. Early on, they equipped ambitious racers with their bikes and were able to make use of their experience in further development. As a result, they always had a technological edge over the competition and were able to achieve many victories in major races. After an eventful history with many highs, but also some lows, they are still one of the leading representatives of Italian bicycle construction today and continue to provide their fans with high-quality products, set trends and are a source of ideas for the entire industry. Whether mountain bike or road bike, a Wilier will always attract envious glances.
With the 0 (Zero) frameset, you have the ultimate basis for a heaven striker. The extremely low weight of the carbon frame seems to defy gravity and provides unbridled propulsion uphill, supported by the high stiffness kit. With an STW value (Stiffness-To-Weight) of 153.9 Nm/°/kg, practically nothing twists. This is achieved on the one hand by using very high-quality carbon fibers, but the position and alignment of these also play a major role. This knowledge can only be achieved through years of experience.
The visual appearance is in no way inferior to the inner values. The flowing transitions, the flawless finish and the impact-resistant paint are evidence of a love of detail that is unfortunately not often found in bicycle construction today. The Italians also consistently follow the trend towards total integration right to the end. In addition to the handlebar/stem unit supplied, which blends in perfectly with the appearance, all cables and Bowden cables are routed completely inside. In addition to a clean design, this also enables excellent aerodynamics.
All these features make the frameset interesting not only for professionals, but also for dedicated amateurs who will appreciate the many features and stand out from the crowd.
Balance design
In order to achieve the same unique riding experience for every frame size, the dimensions of the main tubes have been selected so that comfort, stiffness and stability always achieve the same high values. Whether you're a small mountain biker or a long rouleur, it's definitely not down to the frame ...
Asymmetrical rear triangle
If the force on the rear triangle is distributed unevenly, this leads to a loss of pedaling power. The solution is an asymmetrical design. The left chainstay is tilted more upwards. This prevents the power that the rider applies to the chain from being deflected to the side and used directly for propulsion.
Integrated seat clamp
In addition to the carbon monocoque seatpost specially developed for the 0 (Zero), the seatpost clamp is also an interesting feature. A small expander integrated into the top tube ensures a secure fit at all times, has no negative impact on aerodynamics and is a very aesthetic solution.
Handlebar-stem unit
The handlebar/stem unit supplied is made of lightweight carbon in a monocoque design. This not only ensures exceptional stability, but also saves weight. In addition, there is no clamping area to block the wind. The flat top handlebars provide comfortable support for the hands and allow you to ride long distances without tiring.
As a result of Wilier's own ACCU-FIT system, the handlebar-stem unit has different dimensions depending on the frame size selected in order to provide the optimum riding position for every rider:
Size S: handlebar width (center-to-center): 420 mm, stem length: 100 mm
Size M: Handlebar width (center-center): 420 mm, stem length: 100 mm
Size L: Handlebar width (center-center): 420 mm, stem length: 110 mm
Important note
The frame is only suitable for mounting electronic groupsets.
Technical data
Area of application: Road bike
Frame sizes: S, M, L, XL
Frame material: UD Carbon
Fork material: UD Carbon
Wheel size: 28"
Head tube: 1 1/4" fully integrated
Seat tube (inner diameter): Special size, seat post included in scope of delivery
Seat tube (outer diameter): oval
Bottom bracket standard: Pressfit BB86 (86.5 x 41 mm)
Axle standard fork: 12x100mm thru axle
Axle standard frame: 12x142 mm thru axle
Front disc brake mount: Flat mount
Rear disc brake mount: Flat mount
Max. brake disk size: 160 mm
Gear type: electronic groupsets only
Front derailleur mount: Braze-on mount
Cable routing: completely internal
max. total weight: n.a.
maximum tire width: 30 mm
Feature: interchangeable derailleur hanger, incl. handlebar/stem unit and seat post
Color: glossy black with grey decals
Weight according to manufacturer: 780g (size M, frame only), 340g (fork)
Weight as weighed: 821g (size M, frame only), 1212g (frame and fork)
Scope of delivery:
1x frame including Mavic Speed Release thru axle and integrated seat clamp
1x carbon fork including Mavic Speed Release thru axle
1x handlebar-stem unit
1x headset incl. accessories and spacers
1x seat post
Wheelset 28" Disc RR | Carbon-Ti Road Straightpull Center Lock Hubs | Duke Carbon Rimshandmade - in about 6 - 8 weeks
Wheelset 28" Disc RR | DT Swiss 180 Road Straightpull Center Lock Hubs | ENVE Carbon Rimshandmade - in about 6 - 8 weeks
SHIMANO Dura Ace Di2 Road Group R9270 hydraulic Disc Brake 2x12in about 2 - 3 months