WEAR SET 12-speed Shimano XTR Cassette CS-M9100 | 10-51Z + Shimano CN-M9100 Chain | 126 members
Cheaper than single purchase!
SHIMANO XTR cassette 12-speed CS-M9100-12 10-45 teeth
Shimano is catching up and is also using a 12-speed drive on the XTR M9100 Group. In contrast to the competition, the Japanese, however, the biker, the choice whether he prefers a maximum bandwidth (10-51 teeth) or a more narrow-stepped cassette with lower cadence jumps when switching preferred (10-45 teeth). The latter should be particularly suitable for XC and marathon racers, who can save their power reserves by pedaling in the optimum frequency range.
Soft and precise shifts have always been a hallmark of Shimano cassettes. With the Hyperglide cassettes of the last generations, the pinions were placed in such a way that, especially when switching to a larger pinion, the chain runs extremely smoothly and with low vibration. Hyperglide + introduces the XTR M9100 cassette. Thanks to this technology, gearshifts now run smoothly even when shifting to a heavier gear and are 1/3 faster than the CS-M9000 cartridge.
When designing the cassette, Shimano relies on a material mix of steel, titanium and aluminum in the pinions. While the smallest sprockets with the least chain wrap and highest load are made of steel, the middle sprockets are made of titanium and the largest sprockets are made of aluminum. This load-oriented use of material leads to a uniform wear of the cassette and also extends the life of the chain. The cassette is held together by an aluminum spider.
Technical specifications:
Material 3 big sprocket: aluminum
Material 5 middle sprockets: steel
Material 4 small sprocket: titanium
Technology: Hyperglide +
Switching stages: 12
Grading: 10-12-14-16-18-21-24-28-33-39-45-51
Translation bandwidth: 510%
Compatibility freewheel: Shimano Micro Spline 12-speed
Drive compatibility: Shimano 12-speed drives (Shimano RD-M9100-SGS rear derailleur)
Color: Black
Weight according to manufacturer: 367g
Weight weighed: 369g
SHIMANO XTR Chain CN-M9100 12-speed | 126 links with chain lock
The CN-M9100 chain is specially designed for the M9100 chainrings and cassettes. Milled on the inside of the tabs, the chain blends perfectly with the Dynamic Chain Engagement + (DCE +) Narrow-Wide Tooth profiles on the new XTR chainrings. The design results in a closer fit of the chain on the teeth. Vibration is avoided and the quieter track is not only noticeable when pedaling, but also extremely acoustically by a 4db quieter drive. Thanks to a new chromed surface in combination with the proven SIL-TEC coating, the chain life was maintained at the same level as the M9000 chain, despite the smaller outside width.
NOTE: The CN-M9100 chain is recommended by Shimano only for use with XTR M9100 11- and 12-speed drives.
Shimano chain locks are intended by the manufacturer only for single use!
Technical specifications:
Material: steel, chromed surface
Technology: Hyperglide +; SIL-TEC coating
Compatibility: Shimano XTR M9100 11-, 12-speed drives
Chain Lock: Quick Link SM-CN910-12
Members: 126
Weight according to manufacturer: 242g (114 members)
Weight weighed by yourself:
Delivery:
1x Shimano XTR cassette 12-speed CS-M9100-12 | 10-51 teeth
1x Shimano XTR Chain CN-M9100 12-speed | 126 links with chain lock
DT SWISS Freehub Body Conversion Kit Shimano MTB Micro Spline 12-speed | 12x142 mm/12x148 mm BOOST Thru Axleavailable from stock
SHIMANO Chain Quick Link SM-CN910 for CN-M9100 / M8100 / M7100 / M6100 Chains | 12-speedavailable from stock
SHIMANO XTR | Dura Ace Chain CN-M9100 12-speed | 126 links with Chain Connectoravailable from stock
SHIMANO Disc Brake Rotor Center Lock RT-MT900 | 180 mm IceTech FREEZAavailable from stock
SHIMANO XTR Rear Derailleur 12-speed RD-M9100-SGS Shadow+ long Cageavailable from stock