Description
WEAR SET 11-speed Shimano XTR cassette CS-M9001 + Shimano CN-chain HG901
Cheaper than single purchase!
SHIMANO XTR cartridge 11-speed CS-M9001 teeth 11-40
The new XTR HG-X11 cassette impresses as usual excellent shifting performance, low weight and high wear resistance. According to "Rythm and Range" ratio steps have become smaller and more evenly and the bandwidth is increased. The engineers from Shimano allow this cassette switching to 11-speed , without having to replace the freewheel body, or even the complete rear wheel. Existing 10-speed wheels can easily be provided with the new cartridge. Should be a pinion worn or damaged by a fall, so it can be replaced without new purchase of the complete cassette.
The gearshifts are extremely precise, quiet and efficient, so that the switching pauses be very short.
An intelligent mix of aluminum, steel, titanium, and fiber composite material increases the life and maximizes the stiffness but at the same time reduces the weight of the cassette.
Thus, the basic body is divided into four sections, two of which is made of aluminum and two made of fiber composite material. The largest sprocket is made of aluminum, the 6 next largest of titanium and the smallest 4 made of steel. This is underlined by the high demands on lightweight construction and life of the cartridge. The resulting uniform wear of the individual gear extended additionally the life of the chain.
Technical specifications:
Compatibility: 8/9/ 10-speed freewheel body
Gradation: 11-13-15-17-19-21-24-27-31-35-40 teeth
Material 11-17 teeth: Steel
Material 19-35 teeth: titanium
Material 40 teeth: Aluminum
Body: 2 aluminum Spider, 2 composite fiber Spider
Weight: 331g
Shimano XTR | Dura-Ace CN-HG901 Katte 11-speed 116 links
With their high-quality steel alloy and by adjusting each inner and outer flap, the CN-HG901 chain provides excellent shift quality at high running smoothness. Mud and dirt provides the sophisticated design of the unidirectional chain little contact surface. Thanks to the use of Shimano's new SIL-TEC surface coating, the friction of the chain could be significantly reduced. Compared with simple coatings are in SIL-TEC is a special coating process, which prevents abrasion. By built-fluoro particles, the coating is also dirt-repellent, which further increases the service life of all drive components.
Technical specifications:
Material: Steel
Technology: SIL-TEC Coating
Compatibility: 11-speed drives (Dyna-SYS11)
Members: 116
Weight: 247g (at 114 members)
Cheaper than single purchase!
SHIMANO XTR cartridge 11-speed CS-M9001 teeth 11-40
The new XTR HG-X11 cassette impresses as usual excellent shifting performance, low weight and high wear resistance. According to "Rythm and Range" ratio steps have become smaller and more evenly and the bandwidth is increased. The engineers from Shimano allow this cassette switching to 11-speed , without having to replace the freewheel body, or even the complete rear wheel. Existing 10-speed wheels can easily be provided with the new cartridge. Should be a pinion worn or damaged by a fall, so it can be replaced without new purchase of the complete cassette.
The gearshifts are extremely precise, quiet and efficient, so that the switching pauses be very short.
An intelligent mix of aluminum, steel, titanium, and fiber composite material increases the life and maximizes the stiffness but at the same time reduces the weight of the cassette.
Thus, the basic body is divided into four sections, two of which is made of aluminum and two made of fiber composite material. The largest sprocket is made of aluminum, the 6 next largest of titanium and the smallest 4 made of steel. This is underlined by the high demands on lightweight construction and life of the cartridge. The resulting uniform wear of the individual gear extended additionally the life of the chain.
Technical specifications:
Compatibility: 8/9/ 10-speed freewheel body
Gradation: 11-13-15-17-19-21-24-27-31-35-40 teeth
Material 11-17 teeth: Steel
Material 19-35 teeth: titanium
Material 40 teeth: Aluminum
Body: 2 aluminum Spider, 2 composite fiber Spider
Weight: 331g
Shimano XTR | Dura-Ace CN-HG901 Katte 11-speed 116 links
With their high-quality steel alloy and by adjusting each inner and outer flap, the CN-HG901 chain provides excellent shift quality at high running smoothness. Mud and dirt provides the sophisticated design of the unidirectional chain little contact surface. Thanks to the use of Shimano's new SIL-TEC surface coating, the friction of the chain could be significantly reduced. Compared with simple coatings are in SIL-TEC is a special coating process, which prevents abrasion. By built-fluoro particles, the coating is also dirt-repellent, which further increases the service life of all drive components.
Technical specifications:
Material: Steel
Technology: SIL-TEC Coating
Compatibility: 11-speed drives (Dyna-SYS11)
Members: 116
Weight: 247g (at 114 members)
EAN:
4251761501145
MPN:
25542
