TUNE Nabe rear Fat Kong for 12x177 mm Thru Axle | X-12 | Freehub Body XD (XX1) white SPECIAL OFFER
TUNE hub rear Fat Kong for 12x177 mm thru axle | X-12 | Freewheel XD (XX1)
Tune King & Kong make up the perfect hub pair. Based on this combination Tune developed an offset hub set for Fatbikes. Kong is responsible as rear hub for the propulsion and the hard loads on the rear wheel. The parts made of high-strength aluminum together make a reliable yet lightweight hub. Thanks to the equal flange distances of the offset hubs, both impellers can be constructed symmetrically, resulting in the highest impeller rigidity and service life. The hub body was stiffened in favor of even load distribution on the spokes, also the flanges are inclined in spoke and thus load direction The freewheel mechanism is realized via three pawls, which engage in a toothing made of titanium and thus reliably transmit the driving forces. With 177 mm (X-12 thru axle), the Fat Kong is a new development but with just 240g in this hub class very light. The Fat Kong is equipped for all clamping and drive systems. Fat Kong is stored by four stainless steel bearings, whose size has been adapted to local loads.
All Tune hubs are also available with CeramicSpeed hybrid bearings! More information about the optional CeramicSpeed upgrade you can get here:
CeramicSpeed Upgrade | DE CeramicSpeed Upgrade | EN
intended use : Fatbike Material: aluminum 7075, titanium Installation width: 177 mm axle type : 12x 177 mm thru axle | Maxle Number of holes: 32 Brake disc holder: 6-hole IS2000 standard Freewheel Compatibility: 11-speed and 12-speed XD SRAM Freewheel type: 3 pawls, 24 detent points bearing : 4x industrial bearing (2x 61803-2RS, 1x 61903-2RS, 1x61803-fully spherical) Gasket: sealed twice Spoke tension: 1100N Color of hub body: white