TUNE hub rear Mag 170 MTB | Freewheel Shimano | SRAM
The Mag 170 is the successor of the classic MAG 180. A careful review of the concept allowed the weight to minimize again while the rigidity of the axle even increase! As always, all aluminum parts are made of high strength aluminum and realized the freewheeling three titanium ratchets. The latches engage a gear ring made of titanium and up to even extreme sprints stood.
The Mag 170 hub is available in a special hole in which 16 spoke holes on the right flange and 8 holes are drilled on the left side. This Spoke pattern allows the spoke tension between the two sides almost perfectly adapt. But specially drilled rims must be used for this Spoke pattern!
The Tune Mag 170 hub there for racing bikes with a depth of 130 mm and 135 mm for mountain bikes. The hub can always be converted between two widths!
intended use : Cross Country, Marathon, race bike, cyclo-cross, Gravel
Material: aluminum 7075, titanium
Mounting width: 135 mm
axle type : 5x 135 mm quick release
Number of holes: 16 + 8, 16, 18, 20, 24, 28, 32
Disc brake: ns.
Freewheel compatibility: 10-, 11-speed , Shimano | SRAM
Recovery type: 4 pawls, 44 grids / 2 toothed discs, 18 grids
bearing : 4x cartridge bearings (2x 61803-2RS, 1x 61903-2RS, 1x61803-full complement)
Sealing: Labyrinth Rubber Seals
Spoke tension: 1100N
Colour Hub body: silver, black, red, gold, orange, green, blue, poison-green and white
Weight: 178g (manufacturer)