SYNTACE stem Megaforce3 Torx 31.8 mm | +/- 6 °
The specialist who sets new standards. He is the direct successor of the legendary Megaforce2 and forward-looking designed for 1 1/8 and 1 1/4 fork shafts. Nostalgics will like to remember the time back when the "Megaforce" and its successor "Superforce" shook the bike world. Now is the time for the next evolutionary stage. Syntace from Tacherting in Germany presents with great pride the Megaforce3 Torx.
Similar stiffness values as the massive Force 1.5 with at the same time even lower weight than the already very light Superforce - whole 92 g with 30 mm stock length (including reducing sleeve to 1 1/8 inch). Extra flat for as little disturbing protrusion of the stem over the tax rate and incidentally the first of its kind, which is wider than 41 x 38.0 mm high.
Syntace grants a 10-year warranty on all its products, if these are installed and used in accordance with the installation instructions.
future-oriented and universal
By means of a lightweight reducing sleeve, the stem can be universally used with 1 1/8 or 1 1/4 inch fork shafts.
lightweight Torx titanium bolts as standard
This super-light stem is already equipped ex-factory with high-quality Syntace Torx titanium screws (M5x16) to save even the last gram. Due to its high tensile strength, titanium offers the ideal opportunity to save weight even on safety-relevant parts.
Precision and comfort
Noticeably better handlebar feel with super-wide handlebars. Reduction of "rocking tendency" (antiphase) with good preservation of existing at the handle ends, damping vertical handlebar flex (in-phase). The new combination of extremely horizontal prefabricated ear tube with tangential connection of the 1 1/4 inch fork connection area also allows deeper recessed positioning of the rear, knee-facing clamping screws.
Special 200 ° head
for best handlebar embedding. Higher handlebar stability and longer life without additional weight.
Of course, VR-3 tested
the world's toughest test bench for handlebars and stems.
Flip-flop +/- 6 ° instead of 0 °
This built-in height adjustment saves an additional 7 to 12g on the bike below the stem.
Quick change of the front without laborious dismantling of the fittings and handles.
intended use : MTB, Enduro, Downhill
Material stem: aluminum 7075-T6
Material screws: titanium
Handlebar clamp: Ø 31,8 mm
Steerer diameter: 1 1/8 "and 1 1/4"
Lengths: 30, 40 or 50 mm
Angle: +/- 6 ° (Flip Flop)
Clamping height of the fork shaft: 38.0 mm
Clamp width handlebar: 48.5 mm
Tool holder: T25 Torx
Max. permissible torque: 8 Nm
Weight restriction: without
Finish: Shotpeen Black Anodized
Weight according to manufacturer: n / a
Weight weighed: 83g (30mm, without reducer), 95g (30mm, with reducer)
1x SYNTACE stem Megaforce3 Torx 31.8 mm | +/- 6 °
1x SYNTACE reducing sleeve from 1 1/4 "to 1 1/8" fork shafts
1x SYNTACE LiteCap 1 1/8 overhead cap (without screw)