SYNTACE stem Megaforce 2 31.8 mm | +/- 6 °
Nostalgics will like to remember the time back when the "Megaforce" and its successor "Superforce" shook the bike world.
Now is the time for the next evolutionary stage.
Syntace from Tacherting in Germany presents with great pride the Megaforce 2.
Similar stiffness values as the massive Force 1.5 with at the same time even lower weight than the already very light Superforce - whole 132 g with 70 mm nose length.
Extra flat for as little disturbing protrusion of the stem over the tax rate and incidentally the first of its kind, which is 42x36 mm wider than high.
Precision and comfort
Noticeably better handlebar feel with super-wide handlebars. Reduction of "rocking tendency" (antiphase) with good preservation of existing at the handle ends, damping vertical handlebar flex (in-phase). The new combination of extremely horizontal front tube with tangent connection of the 1 1/8 inch fork connection area also allows deeper recessed positioning of the rear, to the knee-facing clamping screws than before.
The right one for everyone
Super-Fit Sizing system for the latest frame geometries with already lowered head tube height optimal 6 ° (with flip-flop) stem angle. Six finely graded lengths in 10 mm (as otherwise only known from street sports) Size steps from 30 to 80 mm.
Of course, VR-3 tested
the world's toughest test standard for handlebar and stem. With handlebars up to 800 mm tested and released without restriction (rider weight and intended use )!
Factory tinted with captive titanium screws and own positive Megaforce Litecap.
Syntace grants a 10-year warranty on all its products, if these are installed and used in accordance with the installation instructions.
intended use : MTB, Enduro, Downhill
Material stem: aluminum 7075-T6
Material screws: titanium
Handlebar clamp: Ø 31,8 mm
Steerer diameter: 1 1/8 "
Lengths: 30 or 50 mm
Angle: +/- 6 ° (Flip Flop)
Clamping height of the fork shaft: 36.5 mm
Clamp width handlebar: 48.5 mm
Tool holder: 5 mm hexagon socket
Max. permissible torque: 8 Nm
Weight restriction: without
Finish: Shotpeen Black Anodized
Lengths and weights:
30 mm: 108g (self weighed)
60 mm: 127g (self weighed)
1x SYNTACE stem Megaforce2 31.8 mm | +/- 6 °
1x SYNTACE LiteCap 1 1/8 overhead cap (without screw)