SYNTACE Hub rear HiTorque M Rear | 12x142 mm thru axle
The heart of the Syntace wheelsets are the in-house designed and manufactured Syntace HiTorque M hubs (Pat pend.). Finest turning and milling art, simple in appearance, but with an economic ratio of weight to maximum durability.
The toothed wheel: all or none!
The name and the pithy sound make it suspect: The freewheel mechanism of this Syntace hub holds out more than others. Because the principle of the spur gearing developed by us ensures that force-transmitting teeth can not engage individually and are thus overloaded. Instead, all teeth inevitably snap in exactly the same time. And these are 20 precision-machined, high-strength front teeth in Germany, acted upon by four coil springs (technically correct: helical compression springs). The result in rough everyday bike life: Our test driver and uphill-steeple player Jan Lämmel enters his production Liteville 301 since autumn 2011. Without any care or even maintenance - just like in the bike of Trial World Champion Thomas Öhler. Just for comparison: Conventional pawl freewheels have these guys completely independent of the number of latches after four weeks at the most. Trial drivers - not to be confused with trail riders - know only too well what we're talking about here.
Even at low or even minus temperatures, the Syntace HiTorque M shows no locking refusal and even "chain slippage problems" with the following chain blockage. Despite slipping and very durable toothing of the end discs. In Europe - unlike, for example, the sunny state of California - a must for every dedicated mountain biker, we believe.
Butted 17 mm oversize axle , intelligent bearing placement for maximum rigidity and durability with the lowest possible weight. Simply connect the Syntace W-Series axle combine it with all current axle type standards.
High-strength 7075 aluminum, test stand-optimized dimensioning and hub flanges adapted to the spoke angle.
The freewheel body is available as an accessory for the SRAM XX1 shifting group.
Note: The hub comes with a standard Syntace Shimano Freewheel, the SRAM-XD Freewheel is optional and will be rebuilt by us.
- Butted 17 mm oversize axle for maximum rigidity, durability and low weight
- Hub body with two double-sealed 17x30x7 precision deep groove ball bearings. Freewheel with two double-sealed 17x26x5 precision deep groove ball bearings
- Perfect meshing thanks to four helical compression springs and optimized tooth shapes
- Toothed wheel freewheel with 20 tooth pitch, ie 360 ??°: 20 = 18 °
- axle type selectable by easily exchangeable hub end caps
intended use : Cross Country, Marathon, All Mountain
Material: aluminum, 7075
Installation width: 142 mm
axle type : 12x142 mm thru axle
Number of holes: 32 holes
Brake Disc Mount: & - Hole, IS
Freewheel Compatibility: 8-, 9-, 10-speed , 11-speed MTB Shimano | 8-, 9-, 10-speed SRAM, 11-speed and 12-speed XD SRAM
Freewheel Type: Spur Gear
bearing : deep groove ball bearings
Gasket: double-slip sealed
Max. Spoke tension: k. A.
Color: black with lasered logo
Weight: 245g (manufacturer)
Delivery : 1x SYNTACE Hub rear HiTorque M Rear