STAGES CYCLING Power Meter L Carbon FSA 386 EVO and SRAM / Race Face BB30
The Stages Power Meter L Carbon is the power meter for all athletes who drive with an FSA 386 Evo crank set. With the corresponding Stages BB30 crankshaft, the power meter can also be combined with various SRAM, Race-Face, Easton and Specialized cranks . The power meter is pre-assembled on a left Stages carbon crank arm and can be exchanged extremely quickly and easily for the left crank arm of the existing crankset after the correct crank length has been selected. A great advantage over other systems: there is no intervention in the tuning of the wheel and the gearshift.
In the 2018 L- (Left-) power meter all current features from the newly developed LR- (Left-Right) power meter with bilateral power measurement have been integrated. Not only the software, but also the hardware has been revised. The measuring accuracy could be increased to + -1.5%. The antenna has also become stronger and sends the data at 6 times higher intensity, which reduces the risk of dropouts. The L-Powermeter are also compatible with even more bike computers. The integrated cadence sensor was also upgraded to measure even more precise values. Optionally, the cadence can now also be measured using a magnet. As a positive side effect, the new hardware ensures a weight reduction of 5 grams compared to the previous version.
Active temperature compensation ensures that the Stages power meter is measured accurately, even with large temperature fluctuations. With the ANT + and Bluetooth Smart transmission standards, the Stages power meter is compatible with all ANT + -compatible bike computers and the latest smartphone models. Firmware upgrades can be carried out quickly and easily thanks to the wireless transmission to the power meter. The low additional weight of just 15 grams not only inspires lightweight fans, it also hardly affects the performance of the bike.
Technical specifications:
Material: carbon
Power range: 0 to 2500 watts
Accuracy: +/- 1.5%
Cadence measurement: via acceleration sensor or magnet
Cadence range: 20-220 revolutions per minute
Battery life: 200+ hours (button cell CR2032, change possible without tools)
Compatibility: FSA 386 EVO cranks , SRAM Dub MTB cranks , SRAM BB30 Red / Force22 / Rival22 and BB30 MTB, Race Face Next SL, Specialized S-Works, Easton
axle type : BB386 EVO, BB30
Transmission: ANT +, Bluetooth Smart Ready
Software compatibility: Training Peaks, Strava, Garmin Training Center and others
Crank length: 165, 170, 172.5 or 175 mm
Color: Black
Weight: 150g
Scope of delivery: 1x left crank arm + Stages power meter, 1x battery CR2032, instructions
Note: Please use the appropriate Stages crankshaft for your crank (except FSA386 cranks )