SRAM XX1 Crank Black 1x11 GXP | X-SYNC Direct Mount chainring
The further development of the crank XX1 was only a matter of time. Weight optimization and a better ability to adapt to the specific purpose were now in SRAM on the agenda.
Consequently, more of the XX1 Spider a Direct Mount chainring. This not only increases the stiffness of the crank system but also reduces weight, since some additional components can be saved.
Changing the chainring is done as fast as in the previous crank, the crank must be dismantled but for this case. However, is the elimination of the Spiders an even greater variety of useful translations available.
This feature makes the new XX1 even more adaptable. Various chainrings in different gradations of 26 - Available 40 teeth. They have special teeth, X-SYNC, which prevent the chain itself come off in rough conditions and is kept as reliable without chain guide in position.
For the crank arms themselves SRAM uses the proven combination of carbon and aluminum to achieve maximum rigidity and lightness. This makes the new XX1 crank not only for enduro riders but also XC pilots interesting.
Material: carbon, aluminum
bolt circle diameter: no, Direct Mount
Crank arm: 170 or 175mm
Chainring: 32 teeth, X-SYNC Direct Mount chainring
Q: 156 or 168 mm
Colour: black / silver / gray
Weight: 645 g (crank with 32T chainring, without bottom bracket, manufacturer information)
Delivery: Crank included 32Z X-SYNC Direct Mount chainring..
Note: A suitable inner bearing and or other chainring must be purchased separately!
Mounting: Please use the correct mounting of the guidance manufacturer .