SRAM X01 Eagle DUB crank 1x12 | X-SYNC 2 Direct Mount chainring 32 teeth BOOST
After the Eagle components have established themselves on the market, the Americans of SRAM 2018 are coming with the next big coup for the further optimization of mountain bike drives. DUB technology not only simplifies the combination of crankshaft and bottom bracket, it also increases the durability of the bottom bracket. SRAM DUB cranks have a uniform shaft diameter of 28.99 millimeters. Thanks to various variants of the completely redesigned and better-sealed DUB bottom bracket, the cranks are compatible with all common bottom bracket housings. The aluminum crankshafts were also revised, which reduced the weight of the DUB crank sets compared to their predecessors.
Through the use of the carbon tuned manufacturing process, the wall thickness of the X01 Eagle DUB crank could be selected at all points so that it has a very high rigidity and is still an absolute lightweight. In contrast to the XX1 Eagle, the X01 crank is designed to be even more robust so that it can also withstand the stresses of tough enduro use. The crank is supplemented by the new X-Sync 2 Direct Mount chainrings. These impress with a significantly quieter running of the chain and better self-cleaning in muddy conditions. With the proven alternating thick-thin tooth profile, which is matched to the X01 Eagle chain, the X-Sync 2 chainrings always hold the chain securely in place. The crank is delivered with a 32 tooth chainring. You can find retrofit chainrings with 30 to 38 teeth in our shop. The crank is available with 170 mm or 175 mm crank length as well as with black or red X01 logos.
NOTE: You can find the right DUB bottom bracket and other chainrings for your frame in our shop.
Material crank: carbon
Crankshaft material: aluminum
bolt circle diameter : none, direct mount
Crank arm length: 170 or 175 mm
Chainring: 32 teeth, X-SYNC 2 Direct Mount chainring, 3 mm offset (BOOST)
axle type : SRAM DUB
Crankshaft diameter: 28.99 mm
Bottom bracket compatibility: SRAM DUB BSA73, DUB PressFit89 / 92, DUB PressFit30, DUB BB30
chain line : 52 mm (for 148 mm BOOST rear hubs)
Q factor: 168 mm
Color crank: black
Color logos: black or red
Weight: 471g (manufacturer information; 175mm)
Scope of delivery: crank including 32Z X-SYNC 2 Direct Mount chainring