SRAM X01 Crank Red 1x11 BB30 | X-SYNC Direct Mount Chainring
SRAM X01 crank Red 1x11 BB30 | X-SYNC Direct Mount chainring
The further development of the crank X01 was only a matter of time. Weight optimization and a better ability to adapt to the specific purpose were now in SRAM on the agenda. Consequently, more of X01 Spider a Direct Mount chainring. This not only increases the stiffness of the crank system but also reduces weight, since some additional components can be saved. Changing the chainring is done as fast as in the previous crank, the crank must be dismantled but for this case. However, is the elimination of the Spiders an even greater variety of useful translations available. This feature makes the new X01 even more adaptable. Various chainrings in different gradations of 26 - Available 40 teeth. They have special teeth, X-SYNC, which prevent the chain itself come off in rough conditions and is kept as reliable without chain guide in position. The X01 crank is based on the platform of XX1 or X0 crank. Accordingly, the crank has arms made of high-strength carbon. The supporting carbon elements are placed over a light foam core and so form an extremely rigid yet lightweight structure which transmits the driving forces optimally. The BB30 aluminum shaft has additionally a very high rigidity.
Material: carbon, aluminum bolt circle diameter: no, Direct Mount Crank arm: 170 or 175mm Chainring: 32 teeth, X-SYNC Direct Mount chainring Q: 168 mm Achsstandard: BB30 Color: Black / Red
Weight: 635 g (crank with 32T chainring, without bottom bracket, manufacturer information)
Delivery: Crank included 32Z X-SYNC Direct Mount chainring..
Note: A suitable inner bearing and or other chainring must be purchased separately!
Mounting: Please use the correct mounting of the guidance manufacturer .