SRAM Rival 22 road bike group 2x11 | BB30 for mechanical rim brake
The SRAM Rival 22 group delivers enormous performance for many bicycles and disciplines. Whether on asphalt or gravel roads, in cyclocross races or triathlons, in road races or when driving through unknown terrain, the Rival 22 offers ergonomics, efficiency and technologies for every challenge and to push boundaries.
SRAM Rival 22 shift | Brake lever double tap
Once the revolution in the racing bike sector, now a popular standard on racing bike handlebars: the SRAM shift brake levers with their DoubleTap technology. With them, the switching process is only carried out in one direction and with only one lever. Long lever travel ensures upshifting and downshifting with a small lever movement. The zero-loss technology ensures that there is no longer any free travel when switching. As soon as the lever is moved, the switching process is triggered. The lever comes in an ergonomic ErgoFit design, which is also used in the top group SRAM Red. In addition, with the reach adjustment, the lever can be perfectly adjusted for each hand.
SRAM Rival 22 brake set mechanically black
The dual pivot design increases braking power. With their wide distance between the brake arms, the Rival brakes are also ideally suited for wide carbon rims and tires up to 28 millimeters wide. Forged aluminum arms push the weight down. The SwissStop brake pads ensure high braking performance.
SRAM Rival 22 rear derailleur
The Rival 22 rear derailleur is based on the same technologies as the components of the SRAM top group RED. This means that the gear changes are extremely precise and fast, and thanks to AeroGlide pulleys, the chain run is significantly quieter than with less sophisticated components. Minimal compromises only have to be accepted in terms of material and weight. However, SRAM only uses high quality materials such as aluminum and stainless steel.
While the standard rear derailleur was designed for cassettes with a largest sprocket with 28 teeth, the WiFli version is suitable for cassettes with up to 32 teeth.
SRAM Rival 22 BB30 crank
The forged aluminum crank arms of the Rival 22 crank ensure excellent stability. With a removable spider and a large selection of translations, you can optimally adapt the crank for your intended use .
SRAM bottom bracket
High-quality bearings are already available from SRAM in the standard version. With the option of hybrid ceramic bearings, durability and smooth running can be improved.
SRAM Rival 22 cassette 11-speed PG-1130
The PG-1130 cassette is built in a classic design from individual sprockets, the largest sprockets being applied in groups of three to an aluminum spider. The individual sprockets are punched out precisely and a profile is stamped that is optimized for clean gear changes. The shape of the individual teeth of the cassette are optimally matched to each other to enable smooth switching operations.
SRAM chain 11-speed PC-1130 114 links
The SRAM PC-1130 11-speed chain for silky smooth, precise shifting and light weight without affecting durability. Suitable for SRAMs GX and Rival groupsets.
The chain has heavily rounded outer plates for improved shifting and quiet running. The full pin construction of the 11-speed PowerChain from SRAM enables smooth, efficient gear changes without compromising on strength.
including PowerLock chain lock
Total weight: from 2003g
Scope of delivery: SRAM Rival 22 groupset for mechanical rim brakes
Note: The total weight of the group differs depending on the configuration.