SRAM X0 rear hub for Clamps | 12x 142 mm thru-axle | Freewheel SRAM XD
The Sram X0 is Srams Do-it-all group. From all-mountain and enduro use to Cross Country Racing makes it suitable for everything. The Sram X0 hub fit in perfectly into the group. Robust enough for use in rough and light enough for Cross Country race track.
The hub body rotates about 4 extra large double-sealed ball bearings Speed. These provide little friction per wheel revolution and by their precise production include a readjustment of the bearing play of the past. The 3D cold forged and machined hub flanges are angled towards the hub interior. Thus, the stress is reduced to the spoke heads, which leads to less cracks and a dauerhaltbareres impeller favored. The Double Time freewheel system has with its 52 locking points over a very direct load path all 6.9 degrees per wheel revolution. Thus You are in the trail or technical uphill passages your passengers always preceded by a kick. Is achieved, the fine grid is via a toothed wheel with 26 teeth, engage in pairs in the 4 ratchets. Extra high teeth in the sprocket guarantee high durability. With the Side Swap Symmetrical endcaps retooling the hub to another Achsstandard is a breeze. The left and right back are identical, so that no risk of confusion exists, and can be replaced without tools by hand. End caps for 12x142 mm thru axles are included.
We will submit an offer for a complete custom wheelset with the Sram hub, rear hub, spokes and rims of their choice. Please send us an email to firstname.lastname@example.org !
Material: aluminum, steel
bearing: 4-groove ball bearings
Achsstandard: Quick Release | 12x142 mm thru axle
Mounting width: 135 mm | 142 mm
Freewheel system: 4 ratchets
Screening: 52 locking points (all 6.9 degrees per wheel revolution)
Freewheel body: SRAM XD
Brake mount: IS 2000 6-hole
Hole number: 28 or 32
Color: black sandblasted / red or black / silver
Weight: from 250g (manufacturer)
Delivery: 1x rear hub caps for 12x142 mm thru-axle, 1x Quick Release