SCOTT Frame Set 29" Spark RC World Cup HMX | 2023
From now on there are no more excuses. With the frame you have the top material par excellence. This one has what it takes to be a winner, do you too? An absolute racing machine that was developed for nothing more than converting muscle power into propulsion.
Scott is breaking new ground again this year. Integration is the motto. And that is obvious at first glance. Is there a damper missing? Of course not. It sits well protected just above the bottom bracket. What are the advantages of this construction? On the one hand, the damper is very well protected against dirt and other external influences. In addition, weight is saved because the bottom bracket area is already stiff from the outset to maximize stability and therefore less additional material is required for the mount . And last but not least, this frame shape allows you to mount two bottle cages. So you always have enough liquid at hand in a marathon or on long tours.
In addition, with the new design, the suspension travel has grown. This is now 120 mm at the front and rear. For Scott, this is the new standard with a race area. This gives you more comfort and safety reserves off-road. The RockShox SID Select+ Air suspension fork and the RockShox Nude 5 Factory RLC3 damper are perfectly matched to the new geometry, respond very sensitively and smooth out all obstacles.
The supplied TwinLoc 2 lever is the optimal control center for adjusting the chassis of your Spark. With this lever you have the possibility to adjust the fork and damper to the ground at the same time. You have three different modes available - Descend, Traction and Lockout. It can also control a dropper post.
The chain line line, which has been enlarged to 55 mm, has also remained. It offers more installation space for a stiffer chainstay and also allows the use of very wide 2.4" tires. This increases traction and at the same time puncture protection.
The HMX carbon fibers in particular contribute to the low weight and nevertheless high rigidity. These are made exclusively for Scott and come very close to the ideal balance between weight, stiffness and comfort. Particularly critical and stressed areas have been specially reinforced.
The omission of the Horst-Link joint at the rear makes the Spark even easier and reduces the maintenance effort. The function of this is taken over by the flexibly designed seat stays.
The rear brake mount also saves weight. In the past, the prevailing opinion was that the combination of brakes, seat stays and chainstays had to be radically stiff. Scott thought about it and now only connects the brake to the chainstay and directly to the rear wheel axle using a special adapter. As a result, the seatstay does not have to absorb any forces and can be lighter.
A clean and graceful look is achieved with the ICCR cable routing, in which all cables and lines run through the frame. All conceivable constellations were considered. The cables are neatly routed through inserts in the frame, where they are well protected from dirt and rain.
The set already includes a RockShox SID Select+ suspension fork, the RockShox Nude 5 RL3 damper and the Syncros Fraser iC handlebar-stem unit. Everything has been color-matched to the frame, resulting in a unified look that's guaranteed to make you the envy of everyone.
ATTENTION: Scott recommends the use of Shimano or SRAM disc brakes. Models from other manufacturers (e.g. from Magura or Hope) may not be able to be installed for reasons of space.
Area of intended use : cross country, marathon, touring
Material: HMX carbon
Frame sizes: S, M, L, XL
Wheel size: 29"
Head tube: 1 1/8" - 1.5" tapered
Headset: semi-integrated (SHIS ZS56/28.6 – ZS56/40)
Front travel: 120mm
Rear travel: depending on damper mode: Lockout - 80 mm - 120 mm
Fork Offset: 44mm
Seat tube (internal diameter): 31.6 mm
Seat tube (outside diameter): 34.9 mm
Front derailleur attachment: without, only 1x drives
Bottom Bracket Type: PressFit BB92 (92 x 41 mm)
Disc brake mount: Postmount 6" (Scott recommends Shimano or SRAM brakes for space reasons)
maximum brake disc size: 160 mm (180 mm also possible with optional adapter)
maximum tire width: 2.4"
Rear axle system: 12x148 mm BOOST with 55 mm chain line
Type of shifting: Derailleur shifting, only 1-way, mechanical or electronic
max. chainring size: 38 teeth
max. rider weight: not specified
Cable routing: internal
Colour: black-dark green matt with yellow decoration
Weight according to the manufacturer: 1995g (frame and damper, size M)
Scope of delivery:
- Frame Scott Spark RC World Cup HMX | 2023
- RockShox suspension fork SID Select+ RL3 Air 120 mm
- RockShox damper Nude 5 RL3 Trunnion T165x45mm
- Twinloc 2 remote control for fork and damper
- Syncros Fraser iC bar/stem unit
- Syncros Acros Pro headset
- Seat clamp
- Syncros rear axle