Description
SCOTT Frame 29" Scale RC World Cup HMX | 2023
The Scott Scale frames have had a permanent place in the World Cup circuit for a long time. The 2023 model is also being chased by the pros over the World Cup routes. A featherweight racing machine designed for nothing more than converting muscle power into propulsion.
The HMX carbon fibers in particular contribute to the low frame weight of only 912 grams and the nevertheless high rigidity. These are made exclusively for Scott and come very close to the ideal balance between weight, stiffness and comfort. In addition, fibers impregnated with nano resin are installed in particularly stressed and critical areas. This ensures undisturbed propulsion and better protects your frame from serious damage in the event of a fall.
The comfort aspect was not neglected either. The SDS2 (Shock Damping System) was further developed. This is not limited to individual parts of the frame, but considers it as a whole. The arrangement of the carbon fibers was chosen in such a way that the stiffness is not negatively influenced when pedaling and flex is created where it directly benefits the driver for his performance.
With the acceptance of the 1x drives, the seat tube could also be completely revised. A front derailleur is no longer required, the shape is optimized for stiffness and comfort. It has a small mount for the Scott chain guide above the bottom bracket.
A clean and graceful look is achieved with the ICCR cable routing, in which all cables and lines run through the frame. The redesigned routing directly through the head tube avoids additional openings on the down tube and provides even better protection against water and dirt. Inside, the cables are neatly routed through inserts and can therefore be installed without any problems. The small service opening in the front part of the bottom bracket area is also used for simplified relocation or for maintenance work. After removing a plastic plate, you can work inside the frame without having to remove the bottom bracket.
Technical specifications:
Area of intended use : cross country, marathon
Material: HMX carbon
Frame sizes: M, L, XL
Wheel size: 29"
Head tube: 1 1/8" - 1.5" tapered
Headset: fully integrated (SHIS IS42/28.6 | IS52/40)
Travel: Recommended for 80mm - 100mm forks
Fork offset: not specified
Seat tube (internal diameter): 31.6 mm
Seat tube (outer diameter): kA
Front derailleur attachment: without, only for 1-speed drives
Bottom Bracket Type: PressFit BB92
Disc brake mount: Postmount 6"
maximum brake disc size: 160 mm (180 mm also possible with optional adapter)
maximum tire width: 2.3" (also smaller depending on the manufacturer)
Rear axle system: 12x148 mm thru axle boost
Type of shifting: Derailleur shifting, only 1x
max. system weight: 128 kg
Cable routing: internal
Colours: black-dark green with yellow decals
Weight according to the manufacturer: 912g (frame without headset and without thru axle)
Weight weighed:
Scope of delivery:
- Frame Scott Scale RC World Cup HMX | 2023
- Acros drop-in headset
- Syncros rear axle
