849 grams for racers, bikers and fans
A firm place in the World Cup circuit have the Scott Scale Setting long - also the new SCOTT Scale is already chased from the pros on World Cup routes. An absolute racing machine that is designed for nothing more than to transform muscular power into propulsion.
The Scott frames the 2017er generation have been improved in all areas, which results in a lower weight. Here, the Scott entwickeltet SDS2 (Shock Damping System) was introduced. This causes a maximum rigidity in the interests of pedaling efficiency and maximum flexibility for damping without sacrificing performance.
For low weight also carry the new LAY-UP Design and HMX-NET Carbon fibers. The fiber which is made exclusively for Scott, offers 20% more stiffness and is used in all areas that require additional stabilization. NET stands for "Naked External Tube": The frame is without an additional coating, so to speak, "naked" installed. This allows the weight of the SCOTT Scale RC 700 SL be further reduced.
The new brake mounts on the rear wheel contributes its share. Used to be the decisive opinion, the composite of brake, seat and chain stay must be radically stiff. If you have thought about when Scott and the brake is now only connected to the chain stay and via an adapter directly to the rear wheel axle. This has the seat stay clear away any forces and can turn more easily, advantage is of course an increase in flexibility. In addition, the braking torque is significantly better absorbed and now lies almost on the already extremely stiff tensile axle. This is carried out maximum stiff, as they must lift the chain also. This system works with 160mm and 180mm brake discs.
The design of the seat tube has been revised, the positive response of the World Cup circuit simply drives, SCOTT has prompted Scott Scale RC 700 SL only to optimize for single drives. Thus, the seat tube has been optimized, the derailleur mounting lanes could be blank. Less weight, more rigidity, more flexibility.
Even on minor attempts at SCOTT, save weight. When painting and the decals more weight could be saved. Compared to previous models, the weight of the surface finish will be reduced by half.
A clean, graceful appearance is achieved by the ICCR Cable Routing all cables and wires running through the frame. It was thought at all possible constellations, the cables are clean through aluminum inserts in the frame, where they are protected from dirt and rain.
Sensible features are the integrated chain guide (for chainrings from 30-36 teeth), and the newly developed SW dropouts (for Shimano and SRAM derailleurs DM).
Material: HMX SL Net Carbon
Wheel Size: 29 inches
Head tube: 1.5 "to 1 1/8" Tapered
Bottom bracket: BB PF 92
Achsstandard: 148 mm x 12 mm Boost
Drive: Only single-drive (no derailleur possible)
Dropout: SW Dropout (for Shimano and SRAM derailleurs DM)
Disc mount: Postmount 160 mm + 180 mm
SattelstützmaÃ?: 31.6 mm
Cable Routing: Inside
Size: S, M, L
Color: black, orange
Weight: from 849 g (according to manufacturer size M)
- Setting Scott Scale RC 700 SL Carbon
- SW Dropout (SRAM and Shimano DM)
- Synchros tax rate for Tapered or 1 1/8 "forks
- Syncros RWS axle
- Scott Superlight Seatclamp
- Synchros FL1.0 carbon seatpost
- Synchros XR1.0 Carbon Stem
Mounting: Please use the correct mounting of the guidance manufacturer .