ROTOR rear wheel hub R-Volver MTB | Disc Brake 6-hole for 12x148 mm BOOST thru axle | Freewheel SRAM / Shimano
The Spaniards from ROTOR are presenting their first row of hubs with the R-Volver hubs. The pioneers in oval chainrings in cycling also go an innovative and independent way with the interior and appearance of the R-Volver hubs. For example, the freewheel is based on a patented, almost non-contact system that is a mixture of a toothed disc freewheel and pawl freewheel.
When rolling, the specially shaped toothed lock washer is pressed away from the 6 bolts and the freewheel runs with extremely little resistance. This significantly reduces the frictional resistance compared to other systems and the wheel turns longer. At the slightest pedal movement, the bolts shoot into the tooth lock washer and ensure a direct frictional connection. The system is interlocked over 25 teeth and thus engages every 14.4 degrees with one pedal turn. The system saves weight compared to other freewheel systems because there is no need for a fixed connection between the toothed lock washer and the hub body.
The hub bodies are 100% CNC machined. Reduced contact bearing seals not only ensure a long service life, they also reduce the frictional resistance of the hubs when rolling. The milled hub flanges for J-Bend spokes lower the weight and give the R-Volver hubs their special look.
NOTE: Contrary to the illustration, the hub is supplied with SRAM / Shimano freewheel body.
intended use : MTB
Installation width: 148 mm
axle type : 12x148 mm thru-axle BOOST
Number of holes: 28
Brake disc mount: 6-hole
Freewheel compatibility: SRAM 9-, 10-speed | Shimano 9-, 10-, 11-speed
Freewheel type: 6 bolts, 25 locking points
bearing : 4x industrial bearing (2x 6902, 2x 6802)
Color hub body: black
Weight: 238g (manufacturer information)
Scope of delivery: 1x R-Volver MTB rear hub