ROTOR power meter set | PowerPack MTB INSpider | Kapic aluminum crank 1-way Q-ring | oval
The Rotor PowerPacks offer you an inexpensive option to equip your bike with a power meter.
The INSpider power meter fits perfectly into the building block system of the modular rotor cranks . In combination with the lightweight Kapic aluminum crank arms, the PowerPack is intended for use on MTBs. From a technical point of view, the INSpider lies between the 2INpower and INpower power measurement systems from Rotor. While the INpower only measures the power in one crank arm, the INSpider determines the power of both legs using 4 counter-rotating strain gauges. This enables a precise performance analysis of pedaling and potential for improvement can be made visible. The separate analysis of both legs, as the two-sided separate measurement of the 2INpower allows, is not possible. The system automatically compensates for measurement deviations due to temperature fluctuations. However, after installing or changing the chainrings and at least once a month, the INSpider should be calibrated manually using a compatible ANT + / BLuetooth bike computer or the Rotor software. Thanks to a completely encapsulated measurement technology, the power meter is insensitive to environmental influences and, thanks to a magnetic shop connector, is completely waterproof. The built-in battery ensures an operating time of up to 200 hours.
Another highlight of the system is the TORQUE 360 evaluation option. The torque curve during one pedal revolution can be analyzed using Rotor's in-house software. This measurement technology is particularly valuable for riders who use Rotor's oval Q-ring chainrings. The software can determine the optimal position of the Q-Rings via the OCA (optimized-chainring-angle) system. So you can bring your strength to the pedal even more effectively. Due to the fine grid of the INSpider in combination with different positions between the crankshaft and crank arms, the OCP (optimum chainring position) of the Q-ring can be set in 1-degree steps.
NOTE: Contrary to the illustrations, the crank is supplied with a black crank guard.
intended use : Cross Country, Marathon, Tour
Material crank arms: aluminum 7055
Material spider: aluminum 7075
Material chainring: aluminum 7075
Material crankshaft: aluminum 7075
Crankshaft diameter: 30 mm
Crank lengths: 170 or 175.0 mm
bolt circle diameter diameter: 110 mm asymmetrical
Chainring mount: 4-hole asymmetrical (Shimano)
Chainring gradation: 34 or 36 teeth
Ovalization: 12.5%, position adjustable in 1 ° steps
Q factor: 170 mm BOOST
chain line : 52 mm BOOST
Compatibility bottom bracket: BB89, BB92, BB30, BB84, PF30-Fsi Ai, PF30, BSA30
Technology: Rotor Power Meter, OCP-Mount
Power meter measuring strips: 4 (counter-rotating)
Transmission standard: Bluetooth, ANT +
Battery: firmly integrated, up to 200 operating hours (can be charged via charging cable)
Weight according to the manufacturer: INSpider -149g; Kapic aluminum crank set - 498g (165 mm crank arms, crankshaft, 28T chainring; without INSpider)
Weight weighed: INSpider - 149g, Kapic crank arms - 368g (170 mm), 34T chainring - 51g, crankshaft - 111g
Scope of delivery:
1x Rotor Kapic aluminum crank arms
1x rotor 30 mm crankshaft
1x Rotor INSpider power meter including 1-fold chainring | oval
1x charging cable
1x instruction manual
You can find information on assembly here.
Please note the information on the battery regulation .