ROTOR crank set VEGAST for racing bike 1-speed | Direct Mount Round
The rotor VEGAST crank arms offer a low-cost alternative to the ultralight ALDHU aluminum crank arms. In homage to the successes of the Rotor Pro-Tour riders in the big country tours, the name VEGAST is made up of 3 legendary Grand Tours passes (VEleta-GAlibier-STelvio = VEGAST).
For the greatest possible adaptability, the VEGAST crank system has a modular design. Thus, the chain line for disc and rim brake hubs can be adjusted via 2 different shafts and the 110 mm 4-hole Spider can be exchanged for ROTOR's new Direct Mount chainring combinations. For optimum adjustment of the oval ROTOR Q-Rings chainrings, the OCP (Optimum Chainring Position) system has been further refined. Through a combination of different positions of the crank arms on the crankshaft and a fine-styled Spider recording the position of the chainrings can be adjusted in 1-degree increments. For the adjustment and assembly of the chainrings and the crank, only a 10-millimeter hex key is necessary.
The 6082 aluminum crank arms are made with Rotor's proven Trinity Drilling System. Over the entire length of the crank arm material is removed from the central, neutral fiber of the crank arms in 3 channels. This material contributes only slightly to the load capacity of a component and can be omitted without negative consequences. The necessary rigidity and stability is achieved with lightweight construction over large outer diameter.
The ALDHU crankshafts are designed with 30 mm outside diameter as BB30 and can be driven via corresponding bottom bracket in frames with BSA, BBright (Cervélo) and BB30 bottom bracket. For optimum chain line there is a variant for 130 mm width rim brake hubs and 135 mm width disc brake hubs.
1-speed chainring spider combination | round
The single block spider milled from a block of 7075 aluminum is mounted directly on Rotor's modular racing wheel crank systems. The Narrow Wide tooth profile ensures optimum grip of the chain even in off-road use and in poor road conditions, making a chain guide superfluous. They are available with 38 to 54 teeth, making them suitable for a wide range of uses from Cyclocrosser to triathlon bike.
intended use : road bike, cyclocross, triathlon
Material crank arms: aluminum 6082
Material chainring: aluminum 7075
Material crankshaft: aluminum 7075
Diameter crankshaft: 30 mm
Crank lengths: 170, 172.5 or 175.0 mm
bolt circle diameter diameter: -
Spider: in the chainring integrated 4-arm Spider
Chain blade pitch: 38, 40, 42, 44, 46, 48, 50, 52 or 54
chain line : 43.5 mm (rim brake) or 46 mm (disc brake)
Q-factor: 148 mm (rim brake) or 153 mm (disc brake)
Compatibility Bottom Bracket: BSA, ITA, BB86, BB30, BB30A, PF30, BBRight, BB386 Evo (optional, not included)
Compatibility Chain: 9, 10, 11, 12 times
Crank Arms - 386g (175mm)
Crankshaft - 96g (rim brake version)
Sprocket Spider Combination - 156g (52 teeth, oval)
Scope of supply: 1x rotor VEGAST crank arms (left, right), 1x rotor ALDHU crankshaft and 1x rotor ALDHU 1-fold chainring spider combination round