The Pike DJ, a suspension fork especially developed for Slopestyle and Dirt Jumping competitions with which even the highest jumps and the most complicated tricks can be mastered. The little brother of the award-winning Pike has a stable 35 mm casting and is light and stiff enough to jump high and thunder even faster over slopes.
The individually adjustable Charger cushioning shines with jumps of every kind and the special Solo Air system has countless suspension settings for buttery landings.
Particularly stylish: black coated standpipes - because the eye goes with it!
A special shimstack inside the fork optimizes the function with many fast successive strokes. It returns faster to the starting position - the ground contact is increased and the notorious baggage is stopped.
A new damping system, the principle of which has already proved itself in motorsport.
New is a rubber bubble, which absorbs the oil displaced by the piston and supports the rebound with this "supercharging". Furthermore, the mixture of air and damping oil occurring during rough travel is prevented and thus a more constant damping behavior is achieved.
In addition, a separation of damping and lubricating oil is achieved, which is good for the response of the fork.
Revised anchors, even easier to handle, even more reliable under extreme loads.
Additional reinforcements in the dip tubes provide more stiffness and thus not only increase the ride comfort but also the service life of the fork.
The negative and positive air chambers are filled by means of a valve at the same time. What makes setting the personal set-up much easier.
intended use : Dirt Jump, Slopestyle, Trail
Wheel Size: 26 "
Material Fork crown / shank: aluminum
Material standpipes: 35 mm aluminum, black anodized
Material Submersible: Magnesium cast alloy
Spring system: SoloAir, adjustable spring action / curve of two air chambers via an autoventile
Damping: Charger Damper, rebound external, low-speed compression, 3-position compression
axle type : 15x100 mm Axle axle (Maxle Ultimate)
Fork shaft: 1.5 "to 1 1/8" tapered
Offset: 40 mm
Travel: 140 mm
Brake mount: Postmount (160 mm)
Max. Permissible brake disk size: 200 mm
Color: crown and casting black, standpipes black
Weight: 1845 g (manufacturer's data)
Scope of delivery: 15 mm MaxleUltimate plug-in system, fork claw
Note: Illustration shows fork with 100 mm spring travel.