ROCK SHOX seatpost Reverb B1 MMX 125 mm
For a long time bikers have desired a support, in which the altitude can be adapted to the respective terrain situation. Rock Shox has embraced this need and now presents the completely new reverb. This can be lowered by 125 mm, on technical descents the control of the bike and the freedom of movement is decisively improved. Of course you do not have to fumble or screw on the prop, but has a convenient hydraulic X-Loc remote control on the handlebar! This can be installed separately or as a matchmaker version - both are possible.
The restoring speed of the support can be set from very slow to fast directly at the X-Loc lever.
A special sealing system with SKF float pistons and completely new interior life prevents the ingress of water and dirt and ensures the proper functioning in all conditions. The overlapping of the plain bearing bushings has been increased for better reliability.
A ventilation kit (necessary when cutting the hydraulic cable) and a practical height limiting clamp are included in the delivery. If this is installed, the maximum lowering point can be adjusted exactly.
Material: 7050 aluminum, forged
Material Screws: Steel
Diameter: 30,9 | 31.6 34.9 mm
Length: 390 mm (when extended)
Operation: Remote lever with external control (hydraulic)
Adjustment range: 125 mm
Offset: 0 mm
minute Insertion: 80 mm
Compatibility Seat braces: round (7x7 mm) and oval (7x10 mm)
NOTE: When using oval saddle racks, longer screws may be required!
Max. Driver's weight: k. A.
Color: black matt
Weight: approx 520g (340mm, 30.9mm, 100mm Manufacturer's Information)
Note: The seat post and seat tube diameter must be the same. The saddle support diameters are printed on the RockShox products.
Scope of delivery: 1x ROCK SHOX seat post Reverb B1 MMX 100 mm
If you are using a reducer sleeve for the seatpipe, it must be at least 80 mm long or as long as the frame manufacturer (the larger value applies).
Note: Here you will find a German instruction for venting the reverb support.