REVOLOOP tube 28 "REVO.RACE ultra SV 40 mm 2020
The REVO.RACE ultra is the lightest in the REVOLOOP.family. Developed by enthusiasts for enthusiasts, the tube does not compromise. With a weight of 25 grams (manufacturer information), the road bike tube is 50% lighter than conventional butyl tubes. The specific material coordination of the thermoplastic polyurethane gives this tube its unique latex-like rolling behavior and minimizes rolling resistance. For a few watts of extra freedom! Revoloops hoses are made of thermoplastic polyurethane and are significantly more puncture-proof than a conventional butyl hose. The low weight reduces the rotating mass on the bike and makes the racer more agile. In addition, the TPU hoses hold the air much longer than conventional butyl hoses. Constant pumping is a thing of the past.
The valve made of particularly impact-resistant and unbreakable thermoplastic is ahead of its time. Minimum weight paired with maximum performance. A specially designed valve foot prevents damage to the tube due to sharp edges on the valve bore in the rim.
IMPORTANT: Please never fill your REVOLOOP tube outside the jacket with a pressure above 0.5 bar. Otherwise there is a risk that the REVOLOOPs will locally overstretch or even burst. Both scenarios lead to the tube then becoming unusable, since the overstretching of the tube does not deform it again and the tube therefore no longer be fitted. Therefore: Always apply REVOLOOP hoses with a pressure above 0.5 bar when fully assembled.
Light and stable - REVOLOOP valves
The valves developed by REVOLOOP are made from a special, high-strength thermoplastic polyurethane. They combine the highest technical demands with minimal weight and sophisticated design. The internally welded valve foot plate protects the tube against damage from sharp edges on the valve bore in the rim and the dreaded valve tear.
Virtually seamless - REVOLOOP welding technology
REVOLOOP's patent-pending welding process makes it possible for the first time to weld thermoplastic hoses with large wall thicknesses in such a way that an almost flat seam can be created. This technologically demanding process ensures perfect rolling comfort with maximum security against failure due to snakebite and puncture.
Ecologically responsible - REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. As both the inner tube and the valve are made of TPU, REVOLOOP bicycle inner tubes can be completely recycled. Out of responsibility towards the environment.
Made in Germany!
Material: thermoplastic polyurethane (TPU)
intended use : road bike, triathlon, time trial
Compatible sizes (inches): 28 x 0.7 to 28 x 1.1
Compatible sizes (ETRTO): 18 - 622 to 28 - 622
Valve length: 40 mm
Valve standard: SV, changeable (Sclaverand / Presta)
Color: white - transparent
Weight according to the manufacturer: 25g
Weight weighed: 24g
Scope of delivery: 1x REVOLOOP tube 28 "REVO.RACE ultra SV 40 mm 2020
The weights of the hoses may vary due to production.
For environmental reasons, the hoses are supplied by the manufacturer without the original packaging.