REVOLOOP tube 28 "REVO.CC ultra SV 60 mm 2020
The REVO.CC ultra brings a new wind to a 100 year old sport. The tube for the Gravel / Crosser weighs just 30 grams (manufacturer information). This makes the REVO.CC ultra as light as the REVO.RACE ultra. Both combine a unique rolling behavior and very low rolling resistance. The material formulation specially developed for this tube enables an innovative material that combines very high mechanical strength and elasticity and thus enables the specific property profile of the bicycle tube . Revoloops hoses are made of thermoplastic polyurethane and are much more puncture-proof than conventional butyl hoses. The low weight reduces the rotating mass on the bike and makes the Crosser more agile. In addition, the TPU hoses hold the air many times longer than conventional butyl hoses. Constant pumping is a thing of the past. The valve made of particularly impact-resistant and break-proof thermoplastic is ahead of its time. Minimum weight paired with maximum performance. A specially designed valve base prevents damage to the tube from sharp edges on the valve bore of the rim.
IMPORTANT: Please never fill your REVOLOOP tube outside of the jacket with a pressure above 0.5 bar. Otherwise there is a risk that the REVOLOOPs will locally overstretch or even burst. Both scenarios lead to the tube unusable afterwards, since the overstretching of the tube does not deform it back and the tube therefore no longer be fitted. Therefore: REVOLOOP hoses only apply a pressure of more than 0.5 bar when they are fully assembled.
Light and stable - REVOLOOP valves
The valves developed by REVOLOOP are made of a special, high-strength thermoplastic polyurethane. They combine the highest technical demands with minimal weight and sophisticated design. The internally welded valve foot plate protects the tube from damage caused by sharp edges on the valve bore in the rim and the dreaded valve tear-off.
Virtually seamless - REVOLOOP welding technology
REVOLOOP's patent-pending welding process makes it possible for the first time to weld thermoplastic hoses with large wall thicknesses in such a way that an almost flat seam can be created. This technologically demanding process achieves perfect rolling comfort with the highest level of security against failure by snakebite and puncture.
Ecologically responsible - REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. Since both the tube and the valve are made of TPU, REVOLOOP bicycle tubes can be completely recycled. Out of responsibility towards the environment.
Made in Germany!
Material: Thermoplastic Polyurethane (TPU)
intended use : racing bike, cross, gravel, tour
Compatible sizes (inches): 28 x 1.25 to 28 x 1.6
Compatible sizes (ETRTO): 32 - 622 to 40 - 622
Valve length: 60 mm
Valve standard: SV, changeable (Sclaverand / Presta)
Color: white - transparent
Weight according to the manufacturer: 30g
Weight weighed: 28.7g
Scope of delivery: 1x REVOLOOP tube 28 "REVO.CC Ultra SV 60 mm 2020
Note: The weights of the hoses may vary due to production.