RACE FACE Rearwheel 27,5" | 650B Next-R for 12x148 mm BOOST Thru Axle | Freehub Shimano | SRAM
Article details
RACE FACE rear wheel 27,5 "| 650B Next-R for 12x148 mm BOOST thru axle | freewheel Shimano | SRAM
The Race Face Next-R wheels bring your All-Mountain or Enduro bike to a new level of performance. The race rims designed by Race Face are specially designed for the harder gait. With an inside width of 32 millimeters, they provide good support for wide tires at low air pressure and prevent the tire from buckling in fast corners. For a balanced spoke tension the rims have been asymmetrically desaturated and have an offset of the spoke holes of 4.5 millimeters. This not only ensures a higher stiffness of the wheels, but also increases the durability. Practical side effect: Only one spoke length is needed for a wheelset.
The rims revolve around the innovative Race Face Vault hubs. They are characterized by their extremely fine toothing of 120 locking points per wheel revolution. The minimum free travel is particularly noticeable in short climbs or technical demanding uphill sections. The toothing is achieved by a toothed ring with 60 teeth, in each of which 3 of 3 pawls engage at the same time. The oversized hub bodies offer space for extra large bearings, which significantly increase the service life. The durability is supported by a labyrinth seal with low resistance.
The rear wheel is delivered with tubeless tape and tubeless valve. In the unlikely event of a spoke break, replacement spokes are included.
Technical specifications:
intended use : All-Mountain, Trail, Enduro
Impeller size: 27.5 "| 650B (ETRTO: 584 x 32 mm)
Rim Type: clincher for folding and clincher tires, tubeless ready
Disc holder: 6-hole (IS2000)
Material rim: Carbon
Rim height: 24 mm
Rim inside width: 32 mm
Rim offset: 4.5 mm
Spokes: Straight-Pull Spokes (2.0 / 1.5)
Spoke: 28 spokes, crossed 3 times
Hub: Race Face Vault
axle type : for 12x148 mm BOOST floating axle
bearing : 4x oversized industrial bearings (6902)
Seal: labyrinth rubber seals
Freewheel compatibility: 9-, 10-, 11-speed Shimano | 9x, 10-speed SRAM
Freewheel Type: 6 pawls, 120 detent points
Color hub and rim: black, carbon
Finish rim: UD-Carbon matt
Weight: 1595g (front and rear wheel, manufacturer's information)
Scope of supply: 1x rear wheel, tubeless tape, tubeless valve, 5x spare spokes
EAN: 821973319643
Similar Products
-
SYNTACE Rear Wheel 29" C33i Straight Carbon | 12 x 148 mm BOOST Thru Axle | Shimano Freehub Body
850,00 € -
SYNTACE Rear Wheel 27,5" | 650B C33i Straight Carbon | 12 x 148 mm BOOST Thru Axle | Shimano Freehub Body
850,00 € -
SYNTACE Rear Wheel 27,5" | 650B C33i Straight Carbon | 12 x 148 mm BOOST Thru Axle | SRAM XD Freehub Body
850,00 € -
SYNTACE Rear Wheel 29" C33i Straight Carbon | 12 x 148 mm BOOST Thru Axle | SRAM XD Freehub Body
850,00 € -
MCFK Wheelset 27.5" | 650B MTB Carbon Clincher 35 mm Inner Width | DT Swiss 240s Hub
from 1.988,90 € -
SYNTACE Rear Wheel 27,5" | 650B C33i Straight Carbon | 12 x 142 mm Thru Axle | Shimano Freehub Body
850,00 €
Contact information