Description
RACE FACE crank arms Atlas CINCH system colored
The Race Face Atlas crank has been created for the rough. The 7050 aluminum forged and then milled crank has enough reserves for use on downhill and dirt jump bikes. By notches on the back, which do not affect the rigidity, the weight remains pleasingly low for their purpose.
With its universal width of 134 millimeters, the axle can hold various bottom brackets. Common standards such as BSA or the newer Pressfit models BB92 and PF30 are a matter of course for the Atlas. If necessary, the axle also be replaced with a wider one for FatBikes. The highlight of the crank set is the CINCH system. An integrated wave profile in the right crank arm allows the Spider to be easily and quickly mounted, as can be disassembled. The spider is then secured with a lock ring. The assembly takes place via a commercially available bottom bracket key for cartridge bearings.
NOTE: Contrary to the illustration, the crank is sold without a chainring. Matching spiders and chainrings can be found in our shop.
Technical specifications:
intended use : Trail, Enduro, Downhill, Freeride, Dirt Jump, BMX
Material crank arms: aluminum 7050
Material crankshaft: aluminum
Diameter shaft: 30 mm
Attachment chainbatt: Race Face CINCH system
Compatibility Drive: 1x10 / 11/12 MTB
Crank arm length: 170 mm or 175 mm
Q-factor: 178 mm
Color crank arms: black, blue, green or red
Weight: 690g (170mm, 32 teeth Direct Mount chainring, without bottom bracket, manufacturer's specification)
Scope of delivery: Crank arms, axle , without chainring and without bottom bracket
NOTE : For correct installation of the crank, follow the instructions of the manufacturer! The matching bottom bracket for your frame you will find in the compatibility list of the manufacturer!
The Race Face Atlas crank has been created for the rough. The 7050 aluminum forged and then milled crank has enough reserves for use on downhill and dirt jump bikes. By notches on the back, which do not affect the rigidity, the weight remains pleasingly low for their purpose.
With its universal width of 134 millimeters, the axle can hold various bottom brackets. Common standards such as BSA or the newer Pressfit models BB92 and PF30 are a matter of course for the Atlas. If necessary, the axle also be replaced with a wider one for FatBikes. The highlight of the crank set is the CINCH system. An integrated wave profile in the right crank arm allows the Spider to be easily and quickly mounted, as can be disassembled. The spider is then secured with a lock ring. The assembly takes place via a commercially available bottom bracket key for cartridge bearings.
NOTE: Contrary to the illustration, the crank is sold without a chainring. Matching spiders and chainrings can be found in our shop.
Technical specifications:
intended use : Trail, Enduro, Downhill, Freeride, Dirt Jump, BMX
Material crank arms: aluminum 7050
Material crankshaft: aluminum
Diameter shaft: 30 mm
Attachment chainbatt: Race Face CINCH system
Compatibility Drive: 1x10 / 11/12 MTB
Crank arm length: 170 mm or 175 mm
Q-factor: 178 mm
Color crank arms: black, blue, green or red
Weight: 690g (170mm, 32 teeth Direct Mount chainring, without bottom bracket, manufacturer's specification)
Scope of delivery: Crank arms, axle , without chainring and without bottom bracket
NOTE : For correct installation of the crank, follow the instructions of the manufacturer! The matching bottom bracket for your frame you will find in the compatibility list of the manufacturer!
