RACE FACE Crank Set Next SL G4 Carbon CINCH System 2-speed 34 - 24
RACE FACE Crank Next SL G4 Carbon CINCH System 2-fold 34 - 24
The NEXT SL G4 crank has been further optimized by Race Face for 2017. The result is a very light and stiff crank, which can be adapted in the modular system always individually to the wishes of the bikers. Based on 2 hollow carbon arms, which are attached to a 30 mm thick aluminum axle. The arms and axle were developed in Canada and are also produced there. This stiff combination transfers every step into the pedal uncompromisingly on the underground! The axle with its universal width of 134 mm can accommodate various bottom brackets. Common standards such as BSA or the newer Pressfit models BB92 and PF30 are a matter of course for the NEXT SL. If necessary, the axle also be replaced with a wider one for FatBikes. The highlight of the NEXT SL is the CINCH system. An integrated wave profile in the right crank arm allows the Spider to be easily and quickly mounted, as can be disassembled. The spider is then secured with a lock ring. The assembly takes place via a commercially available bottom bracket key for cartridge bearings. Various spiders and a 1-speed direct mount chainring are available for the crank.
The crank kit for 11-speed circuits offered here contains the Spider with LK 104 | 64 and matching Race Face chainrings in 34 and 24 teeth.
intended use : XC Race, Trail, Enduro Material crank arms: carbon Material axle and chainrings: aluminum Diameter shaft: 30 mm Attachment Spider: Race Face CINCH system Spider: 2-fold bolt circle diameter : 104 | 64 mm Chainrings: 34 - 24 Crank arm length: 170 mm, 175 mm chain line : 2-fold - 49.5 mm Finish: UD Carbon matt
Scope of delivery: crank arms, axle , crank bolts, spider, chainrings ( without bottom bracket )
Note: Please note the instructions of the manufacturer for the correct installation of the crank! The matching bottom bracket for your frame can be found in the manufacturer's compatibility list !