RACE FACE crank arms turbine CINCH System
Race Face has created hand at classic turbine and revised the crank completely.
The result is a very stiff crank which can be individually adapted to the needs of the cyclist in a modular system always. Basis are 2 forged and then CNC machined aluminum arms that are attached to a 30 mm aluminum axle. This rigid Combined transmits every kick in the pedal uncompromising on the ground! The axle can take on their universal width of 134 mm various internal bearing. Common standards such as BSA or the newer models Pressfit BB92 and PF30 are of course for the turbine. If needed, the axle can also be replaced by a wider one for Fatbikes. The highlight of the turbine is the RCA system. An integrated corrugated profile in the right crank arm of the spider can be dismantled as quickly and easily mounted. The spider is then secured with a lockring. Mounting is via a standard Cassette. For the crank 3 different Spider and a 1-fold Direct Mount chainring available.
Material: 7050 aluminum
Diameter shaft: 30 mm
Fixing Spider: Race Face CINCH System
Crank arm: 170 mm, 175 mm, 180 mm
chain line: 2x - 49 mm, 3-fold - 51 mm, single ring / Spiderless direct mount - 51 mm
Color: black, red or blue
Weight: 568g (175mm)
Delivery: crank arms, axle and crank bolts (without Spider, chainrings, bottom bracket)
Note: Note the correct assembly of the crank, the instructions of the manufacturer! The right bottom bracket for your frame, check the compatibility list of the manufacturer!