RACE FACE Crank Arms Sixc Carbon CINCH System 83 mm
RACE FACE Crank Arms Sixc Carbon CINCH System
Race Face has completely redesigned the popular Sixc crank for the new product year. The result is a very light and stiff crank, which can be adapted in the modular system always individually to the wishes of the bikers. Based on 2 hollow carbon arms, which are attached to a 30 mm thick aluminum axle. The arms and axle were developed in Canada and are also produced there. This stiff combination transfers every step into the pedal uncompromisingly on the underground! The axle with its universal width of 134 mm can accommodate various bottom brackets. Common standards such as BSA or the newer Pressfit models BB92 and PF30 are a matter of course for the Sixc. If necessary, the axle also be replaced with a wider one for FatBikes. The trick at the Sixc is the CINCH system. An integrated wave profile in the right crank arm allows the Spider to be easily and quickly mounted, as can be disassembled. The spider is then secured with a lock ring. The assembly takes place via a commercially available bottom bracket key for cartridge bearings. Various spiders and a 1-speed direct mount chainring are available for the crank.
Material: carbon, aluminum Diameter shaft: 30 mm Attachment Spider: Race Face CINCH system Crank arm length: 165 mm, 170 mm chain line : 83 mm axle - 57 mm Finish: UD Carbon matt
Scope of delivery: crank arms, axle and crank bolts ( without spider, chainrings, bottom bracket )