RACE FACE Crank Arms Next SL G4 Stealth Carbon CINCH System
RACEFACE crank arms Next SL G4 Stealth Carbon CINCH system
The NEXT SL G4 crank has been further optimized by Raceface for 2017. An even lighter and stiff G4 crank has emerged, which can always be individually adapted to the bikers' wishes in the modular system. The basis is 2 hollow carbon arms, which are attached to a 30 mm thick aluminum axle. Arms and axle were developed and produced in Canada. This stiff combi delivers every kick over the pedal uncompromisingly into the ground! With its universal width of 134 mm, the axle can accommodate various inner bearings. Common standards like BSA or the newer pressfit models BB92 and PF30 are self-evident for the NEXT SL G4. If necessary, the axle also be exchanged for a wider one for FatBikes. The highlight of the NEXT SL is the CINCH system. An integrated shaft profile in the right crank arm allows the spider to be mounted easily and quickly as well as dismantled. The spider is then secured with a lock ring. The assembly is carried out by means of a commercially available cassette extractor. For the crank are 3 different spiders and a single DirectMount chainring available.
Material crank arms: Carbon Material axle : aluminum Diameter shaft: 30 mm Mounting spider: Raceface CINCH system Crank arm length: 170 mm, 175 mm chain line : 2x - 49.5 mm, 3-fold - 51mm, single ring / Spiderless Direct Mount - 51 mm Q factor: 168 mm (at 134 mm wavelength) Finish: UD Carbon matt Decals: black / silver
Weight: 363g (170mm), 369g (175mm)
Scope of delivery: crank arms, axle , crankshafts, Crank Boots ( without spider, chainrings, inner bearing )
Note: Please pay attention to the instructions of the manufacturer for the correct mounting of the crank!
Other customers have also bought the following items