PRO Seatpost Koryak DSP Vario internal | 170 mm
Just up a steep hill, now a small downhill or tricky trail. With this Vario seat post you always have the optimum seating position, without cumbersome adjustment to the quick release.
The PRO Koryak DSP is an aluminum-made seatpost for all-mountail to freeride use.
Thanks to the remote lever mounted on the handlebar, it can easily be infinitely adjusted by an enormous 170 mm. The Shimano Optislick train runs very smoothly and is permanently corrosion-resistant thanks to a special coating. The internal cable routing of the seat post avoids annoying cables on the bike, serves the better appearance and safety.
The saddle is attached to the post using a single-screw clamp.
Application: All-Mountain, Enduro, Trail, Freeride
Material: Aluminum 2024-AL
Material screws: steel
Diameter: 30.9 mm or 31.6 mm
Length: 507 mm (when extended)
Operation: Remote lever with internal control (inner train laying)
Adjustment range: 170 mm
Offset: 0 mm
minute Inset: 107 mm
Max. Inset: 279 mm
Max. possible usable height: 400 mm (upper edge of saddle clamp to lower edge of saddle frame)
Compatibility seat stays: round (7x7 mm)
Max. Rider weight: n / a
Color: black matt
Weight according to manufacturer: 538g (30,9 mm)
Weight weighed by yourself: -
1x PRO Koryak DSP Vario internal | 170 mm seat post
1x PRO One-by-remote lever
1x inner cable
1x outer skin
Note: This seat post has an internal control. That is, the train through the frame
(Seat tube) must be laid. Please make sure that your frame for the use of supports
with internal control is provided!