PRAXIS WORKS bottom bracket BB30 | PF30 73 mm for Praxis Works M30 THRU MTB crank
The noble bottom brackets from PRAXIS WORKS are the result of complex developments in Santa Cruz, California. With a few detailed solutions, the bottom bracket knows how to convince and the choice of materials and production strategies promote absolute added value for your bike. The robust design and the elaborately protected ball bearings enable a long service life with the highest requirements.
Rubber Collet Ring
The technology patented by Praxis Works compensates for small tolerances in the frame, thus avoiding annoying clicking noises. When the two shells are twisted together, an elastomer is compressed in a defined manner. This elastomer builds up light pressure on the bearings in order to sit in the frame without play.
With this bottom bracket you can drive your Praxis Works M30 MTB crank in a frame which is designed for BB30 or PF30 bottom bracket standard. To compensate for the difference in outer diameter between BB30 and PF30, PRAXIS WORKS supplies you with a robust plastic sleeve made of Delrin as an adapter.
intended use : MTB
Material bearing shell: aluminum 7075-T6
Material bearing: steel
Bottom bracket type: BB30 | PressFit 30
Inner bearing shell width: 73 mm
Inner bearing housing Ø: 42 mm (BB30) | 46 mm (PF30)
Crank shaft diameter: 30 mm
Compatibility crank: Praxis Works M30 THRU | cranks with a long 30 mm shaft
Bearings: Enduro Bearings industrial ball bearings
Tool holder: Praxis Works tool M30 BB
Weight according to the manufacturer: n / a
Weight weighed: 126g
Scope of delivery: 1x PRAXIS WORKS bottom bracket BB30 | PF30 73 mm for Praxis Works M30 THRU MTB crank including adapter sleeve