PRACTICE WORKS Braquet THRU M30 73 mm MTB for Race Face Cinch | rotor Rex1
The practice Works M30 BSA bottom bracket 68 has been developed for the use of Race Face RCA and rotor Rex1 MTB cranks on frame with 73 mm bottom bracket shell. Due to its adapter sleeve, it is suitable for both frame with BB30 and PressFit30 recording. With its cold forged and black anodized aluminum bearing shells inside the center looks very high quality impression.
Mounted it is by the longer bearing side pressed into the non-drive side of the frame and the shorter bushing is screwed on the drive side. For a play-free seating on frames with BB30 standard, the bearing sleeve expands when screwing the camp. To compensate for mounting tolerances is the stock with a compressible spacer ring.
NOTE: For pressing the bottom bracket to the use of the practice Works M30 Tools recommends that you can find in our shop.
Material Bushings: Aluminum
Material bearing: Steel
Bearing Type: sealed bearings 6806
Diameter shaft crank: 30mm
Compatibility Crank: Race Face Cinch | Rotor Rex1 MTB crankset
Compatibility Setting: BB30 | PF30 Up
Color: black anodised
Weight: 146g including PF30 adapter sleeve (17g)
For information about installing the bottom bracket you can find here .