PRACTICE WORKS bottom bracket BB30 M30 | PF30 68 mm for turn Zayante M30 crank
The practice Works M30 bottom bracket is suitable for the use of the turn Zayante M30 Road crank of Practice Works. A provided sleeve bottom bracket for road frames with BB30 and PF30 Standard, and for 2014/2015 Specialized frames with OSBB Standard is suitable. The bearing shells are, however, not press-fitted into the frame. The bottom bracket converts the BB30 / PF30 standard for BSA standard, so that the bearing shells sit outside the frame. When screwing the bearing shells to the bearing sleeve expands in BB30 / PF30 bearing seat. Unlike many other adapters that ensures a permanently tight fit in the frame and annoying clicking noises through a working internal bearing may be excluded.
For information about installing the bottom bracket can be found here .
NOTE: Due to different bearing inside diameter on the drive and non-drive side bottom bracket is only suitable for turn Zayante M30 crank. For assembly, the practice Works M30 BB tool is required.
Material: Aluminiun, steel
Mounting width: 68 mm
Diameter bottom bracket: 42 mm (BB30) or 46 mm (PF30)
Diameter shaft crank: 30 mm / 28 mm
Compatibility: Turn Zayante M30 Road Crank
Special price: 175,00 €