The world's first system that per pedal rotation in 30 ° intervals, the motor as well as the measures Krafteinwirkwinkel left and right separately precision. The pre-installed on the left crank power measurement sensor and the sensor for the right crank unit can be combined to support performance measurement both the SGX-CA500 as well as with all ANT + devices.
In conjunction with an ANT + device the total wattage display and Cadence is displayed. If you use the SGX-CA500, in addition, the 12 power efficiency vectors every 30 ° are shown are measured.
The two sensors and two different types of magnets to detect the pedal rotation make the system even more types of bicycle use.
Maintenance as zero calibration, battery change, etc. can be performed easily.
The training data obtained can use the Internet-based services Cyclo-Sphere are analyzed. By combining various data, you can analyze your ride or compare by creating MMP Graphics with previous workouts.
Important: Please contact if interested our customer, since the installation of the sensor on
Right Crank Arm (drive side) is performed by Pioneer and this is why
must be sent to Pioneer!
Size Sensor left, width | height | Depth: 92.5 mm | 34.7 mm | 8.6 mm
Size sensor right width | height | Depth: 58 mm | 46.1 mm | 21.3 mm
Size connection module width | height | Depth: 78 mm | 36.7 mm | 7.3 mm
Communications System: (sensors) ANT + standard
Water resistance: This equipment is protected against powerful water jets (IPX6 / IPX7)
Battery life: about 180 hours
Guaranteed Operating Temperature Range: -10 to 50 ° C
Weight: 66g (without sensor left crank arm manufacturer)
40g (without sensor right crank and chainrings, manufacturer information)
Delivery: Pioneer tread sensor right (without crank and chainrings!)
If sensor left incl. Crank, batteries, mounting materials, magnetic
right sensor cover in gray, manual and warranty card
Please check the Pioneer Web service use for detailed analyzes: Note Cyclo-Sphere
Note the instructions for Battery Recycling .