PI ROPE Wheelset 29 " RL Squirrel X.22 Carbon Gen1
An XC wheelset with textile spokes?
So far, there have been many approaches from well-known manufacturers, but all brought little satisfactory results. The young and extremely innovative think tank PI ROPE from Chemnitz in Saxony has made the impossible possible in cooperation with the Chemnitz University of Technology. The result is a textile spoke made of braided Vectran synthetic fibers.
The material is extremely robust, resistant to aging and weathering and has better mechanical properties than its counterpart made of steel. The tensile strength and damping is many times higher, but the weight of the fibers is five times lower. This provides the optimum conditions for a very light yet durable impeller, as the rotating masses in the important outer areas are minimized and the flexibility of the Vectran textile spokes avoids permanent, plastic deformation at high load peaks.
In collaboration with the well-known wheel and component manufacturer NEWMEN, hubs and rims have been specially developed to accommodate the special ends of PI ROPE spokes. One of the reasons for this was the extremely lightweight Advanced SL X.22 carbon rim, which with its low weight and high stability provides the optimum basis for lightweight construction.
The combination of PI ROPE textile spokes and NEWMEN hubs and rims makes for a fast, lightweight and yet comfortable wheelset that is not only suitable for XC bikers but also for marathon riders.
intended use : Cross Country, Marathon Weight according to manufacturer: 1063g
Impeller size: 29 "(ETRTO: 622 x 22 mm)
Rim type: clincher (wire and folding tire)
Brake type: only for disc brake
Brake disc mount: 6-hole (IS2000)
Material: aluminum, steel, Vectran, carbon
Inner width: 22 mm
Outside width: 26.9 mm
Rim height: 18.5 mm
Number of holes: 28 holes (per rim)
Rear axle type standard: 12x148 mm thru axle (BOOST / Outboard)
axle type forward: 15x110 mm plug axis (BOOST / outboard)
Rear bearing : 4x industrial bearings (NEWMEN 2x BB CB 17x26x5 C3 LLH, 2x BB CB 17x30x7 C3 LLH)
Front bearing : 2x bearing (NEWMEN Bearing CB CB 17x26x5 C3 LLH)
Seal: labyrinth rubber seals
Freewheel Compatibility: 9-, 10-, 11-speed MTB Shimano | SRAM, 11-, 12-speed SRAM XD
Freewheel type: 2 toothed pulleys, 36 detents
Spokes: 56x Pi ROPE Vectran Textile Spokes / Straightpull (natural)
tubeless capable: yes
Recommended tire width: 50-62 mm
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Finish: TeXtrem Carbon matt
Color: hubs / rims black, logos gray
Weight weighed by yourself:
Delivery: 1x PI ROPE RL Squirrel X.22 Carbon Gen1 Wheelset 29 "