If you decide on a PI ROPE wheelset from GEN1 (except RL SUB1) we will give you a 100 € voucher for our shop.
The voucher will be sent to you by email after your order. Alternatively, you can also order products worth 100 euros or more with the wheelset. We will then reimburse the amount of 100 euros.
PI ROPE wheelset 29 "RL One A.30 aluminum Gen1
An All Mountain wheelset with textile spokes?
So far, there have been many approaches by well-known manufacturers, but all of them have brought unsatisfactory results. The young and extremely innovative think tank PI ROPE from Chemnitz in Saxony has made the impossible possible in cooperation with the Chemnitz University of Technology. The result is a textile spoke made of braided Vectran synthetic fibers.
The material is extremely robust, aging and weather resistant and has better mechanical properties than its steel counterpart. The tensile strength and damping are many times higher, but the weight of the fibers is five times lower. This provides the ideal prerequisite for a very light yet durable impeller, as the rotating masses in the important outer areas are minimized and the flexibility of the Vectran textile spokes prevents permanent, plastic deformation at high load peaks.
In collaboration with the well-known wheel and component manufacturer NEWMEN, hubs and rims have been specially developed that can accommodate the special ends of the PI ROPE spokes. The inspiration for this was, among other things, the tried and tested Evolution SL A.30 aluminum rim, which with its low weight and high stability offers an optimal basis.
The combination of PI ROPE textile spokes and NEWMEN hubs and rims results in a light and fast wheelset that is perfect for AllMountain riders who want to take advantage of wide rims and low weight.
intended use : All Mountain, Trail
Wheel size: 29 "(ETRTO: 622 x 30 mm)
Rim type: clincher (clincher and folding tire)
Brake type: for disc brake only
Brake disc mount: 6-hole (IS2000)
Material: aluminum, steel, Vectran
Inner width: 30 mm
Outside width: 34 mm
Rim height: 21 mm
Number of holes: 28 holes (per rim)
axle type rear: 12x148 mm plug axis (BOOST / outboard)
axle type forward: 15x110 mm plug axis (BOOST / outboard)
Rear bearing : 4x industrial bearings (NEWMEN 2x BB CB 17x26x5 C3 LLH, 2x BB CB 17x30x7 C3 LLH)
Front bearing : 2x industrial bearings (NEWMEN Bearing BB CB 17x26x5 C3 LLH)
Seal: labyrinth rubber seals
Freewheel compatibility: 9-, 10-, 11-speed MTB Shimano | SRAM, 11-, 12-speed SRAM XD
Freewheel type: 2 tooth lock washers, 36 grids
Spokes: 56x Pi ROPE Vectran textile spokes / straight pull (natural)
tubeless capable: yes
recommended tire width: 57-89 mm
maximum system weight: 125 kg (driver, bike, clothing and possibly luggage)
Finish: Shotpeen Black Anodized
Color: hubs / rims black, logos gray
Weight weighed: 1507g
Scope of delivery: 1x PI ROPE RL One A.30 aluminum Gen1 wheelset 29 "