OPENCYCLE Mountainbike Frame 29" | 27,5" OPEN ONE+ Carbon Size L
OPEN CYCLE mountain bike frame 29 "| 27.5" OPEN ONE + Carbon The Open One + development team combines to Gerard Vroomen the virtues of a lightweight, uncompromising Cross Country frame with a bike for demanding trails and splinted intended use. Due to the special rear of Open One + this is compatible without restrictions with modern plus-size wheels.At the frame size adjusted wheel sizes optimize the bike for the actual driver and the intended use. When RahmenbauHiis-modulus carbon used inaerospace, to meet its own high standards of the product. Dabei is not abouthighor low-Modulus Carbon,it comes tothe use ofcarbon inthe right place (TRCinTRS). The revised rear with floating axle as a connecting element between the impeller and frame, not only guarantees more stiffness but also lower weight. The choice fell on the X-12 BOOST standard, complete with its own 12x148 mm thru-axle. When BOOST standard chainring 3mm travels further outward, so the rear is at the same Q-factor 6mm wider than conventional hubs, thus the wheels are stiff, without any to it, the ergonomics is concerned restrictions. Additionally ONE + chainstay were on OPEN lowered, which brings a bit more space for the drive train as well as for the strut itself. It can now be carried out even larger and more stable. For the comfort and enhanced traction, the leaf-spring-shaped seatstays are responsible (Wire stays). The 12 mm ThruThread dropouts for floating axles combine the thread of the axle with the mounting of the derailleur hanger. So you have the advantage of rigidity through axle without additional extra weight of the mounts on the frame. Even the choice of the bottom bracket, there are innovations. OPEN changes from known BBright standard to BB92. This step allows a variety of combinations crank for the frame and an improved weight / stiffness ratio in the bottom bracket. Open Cycle frames are prepared for the future. Conversion to electric circuits with the current Shimano Di2 standard is the clever cable guides (optional) at any time. Also a loading with the hydraulic circuit components by Acros is not a problem.
Material: Carbon Frame sizes: S, M, L Headtube: 1 1/8 - 1.5 "tapered Tax rate: tapered integrated (SHI IS42 / 28.6 | IS52 / 40) Seat tube (inside diameter): 27.2 mm Seat tube (outer diameter): 30.0 mm Travel: designed for 100mm forks Derailleur: frame without front derailleur Switching type: single speed or circuit Di2 compatible (1x10 / 11 / 12x, 2x10 / 11-speed) Bottom Bracket: BB92 PressFit Disc brake mount: Postmount 6 ", 160 mm brake disc axle receiver: 12x148 mm thru-axle X-12 BOOST suitable tire sizes for frame size M / L: 29 "x 2.4" and 27.5 "x 3.0" suitable tire dimensions Frame size S: 27.5 "x 2.4" and 26 "x 3.0" Cable management: inboard Color: Carbon black / matt
Weight: 890g (. Size M, including hanger)
Delivery: Frame, headset, seat clamp, thru-axle, rear derailleur hanger Standard Derailleur hanger Shimano Direct Mount, cable stops (2-fold, 1-fold, Di2) Inner bearing sleeves, liners for switching trains, foam sheathing for Shift cables and brake lines for noise insulation, bottle holder screws Manual
The Complete shown on the pictures is only a configuration example and not Component of the offer!