Custom bike based on the OPEN CYCLE 29 "mountain bike frame OPEN 1.0 Carbon The open frame is characterized as follows:
For ttube who want to stand out from the crowd and looking for are something special, we have the complete your complete wheel assembly to Custom. The diversity are no limits. There is almost everything possible so that your desired bike down to the smallest screw corresponds to your ideas. Based on the open frame are bikes from 6500g problem. The wheel in the gallery will serve as an example here. For a consultation we are anytime by mail or phone.
Of course, custom bikes of other brands are possible in addition to OPEN!
The top model of the OPEN 29ers. Opposite the OPEN-1.1 about 100 grams were again saved without having to accept to the loss of stability. In timeless matt carbon finish makes it particularly suitable for a super lightweight Race-building.
Open Cycle used 100% Hi - Modulus Carbon in aerospace quality, not to impress you but to its own high standards of the product to meet. According to the motto competes stiff yet comfortable with the extra traction This is not about high or low -Modulus Carbon, it comes to the use of carbon in the right place..
This makes the Open Cycle 29er hardtail frame with one of the lightest in the world, made even the toughest industry tests (EFBE).
The innovative design of the internal and throttle cables not only creates a clean look, but also still saves weight. The shift cables run under open, but are protected from dirt and so require only a minimum of external shell. For the rear brake line, a liner was charged with einlameniert to simplify the assembly and in the event of an accident prevent the full running of the frame with brake fluid.
Open Cycle frames are prepared for the future. Conversion to electric circuits with the current Shimano Di2 standard is the clever cable guides (optional) at any time. Also a loading with the hydraulic circuit components by Acros is not a problem.
Appointed by Cervelo developer BBright Pressfit crank Standard adds even an additional degree of stiffness. Optimal developed for the specifically for Open Cycle color coordinated rotor suitable crank (optional). A configuration with Hollowtech II, GXP or rotor compatible cranks with matching bottom bracket possible (available in our shop).
Frame sizes: S, M, L, XL
Headtube: 1 1/8 - 1.5 "tapered SHI's semi-integrated ZS44 / 28.6 | ZS55 / 40
Tax rate: ROTOR HS SITP15-B Tapered
Seat tube (inside diameter): 27.2 mm
Seat tube (outer diameter): 30.0 mm
Travel: designed for 80 and 100 mm forks
Switching: circuit or Singlespeed
Bottom bracket: BBright Pressfit Standard
Disc brake mount: Post Mount 6 "
axle type: quick release, 10 x 135 mm thru bolt
suitable wheel size: 29 "
maximum tire width: 2.25 "(depending on the manufacturer also small)
Cable management: inboard
Color: Carbon, matt
Warranties: 3 years standard warranty on the frame, expansion to 5 years to registration within 30 days of purchase. 10 years crash replacement for the price of 50% of the current MSRP of the frame.
Weight: 871g (Size L)
| The geometry data are based on using a 100 mm fork. |