OPEN CYCLE 29 "mountain bike frame OPEN 1.1 Carbon White + Rotor 3D crank
Frame set with matching, exclusive Rotor 3D crank
Open Cycle used 100% Hi - Modulus Carbon in aerospace quality, not to impress you but to its own high standards of the product to meet. According to the motto competes stiff yet comfortable with the extra traction This is not about high or low -Modulus Carbon, it comes to the use of carbon in the right place..
This makes the Open Cycle 29er hardtail frame with one of the lightest in the world, made even the toughest industry tests (EFBE).
The innovative design of the internal and throttle cables not only creates a clean look, but also still saves weight. The shift cables run under open, but are protected from dirt and so require only a minimum of external shell. For the rear brake line, a liner was charged with einlameniert to simplify the assembly and in the event of an accident prevent the full running of the frame with brake fluid.
Open Cycle frames are prepared for the future. Conversion to electric circuits with the current Shimano Di2 standard is the clever cable guides (optional) at any time. Also a loading with the hydraulic circuit components by Acros is not a problem.
Appointed by Cervelo developer BBright Pressfit crank Standard adds even an additional degree of stiffness. Optimal developed for the specifically for Open Cycle color coordinated rotor suitable crank (optional). A configuration with Hollowtech II, GXP or rotor compatible cranks with matching bottom bracket possible (available in our shop).
Based on the successful Rotor 3D crank, you will receive the exclusive, prepared for OPEN CYCLE crank. The crank with a 38/24 teeth Kombiniation is optimal for 29er mountain bikes.
Frame sizes: S, M, L, XL
Headtube: 1 1/8 - 1.5 "tapered semi-integrated S: HIS ZS44 / 28.6 | ZS55 / 40
Tax rate: ROTOR HS SITP15-B Tapered
Seat tube (inside diameter): 27.2 mm
Seat tube (outer diameter): 30 mm
Travel: designed for 80 and 100 mm forks
Switching: circuit or Singlespeed
Bottom bracket: BBright Pressfit Standard
Disc brake mount: Post Mount 6 "
axle type: quick release, 10 x 135 mm thru bolt
suitable wheel size: 29 "
maximum tire width: 2.25 "(depending on the manufacturer also small)
Cable management: inboard
Warranties: 3 years standard warranty on the frame, expansion to 5 years to registration within 30 days of purchase. 10 years crash replacement for the price of 50% of the current MSRP of the frame.
Weight: 986g (size L without crank)
Delivery: only the frame and headset + Rotor 3D crank with chainrings, not the entire bike.
Note: The geometry data are based on using a 100 mm fork.
Special price: 75,00 €