Notubes Tubelesskit Freeride 24 "to 26"
With the already completed zusammenestellten Tubelesskits Stan's NoTubes can to operation without tube easily a conventional impeller - to be converted - tubeless. Simply remove the old rim tape and instead stick the yellow tape over the spoke holes. Following only the rubber band and the tire must be mounted. Elastic and tires provide a unit which is sealed without tube and after the addition of some milk seal remains tight. The sealing fluid seals small punctures while driving also subsequently and in most cases from unnoticed.
Duch eliminating the tube, the rolling resistance is reduced, the flexing of the tube, and the friction between the tube and tire are twins! The tire works thereby also markedly free and provides increased traction and comfort.
The Freeride Tubelesskit is suitable for most 26 "wheels with an exterior length of 27 up to 34 mm.
Diameter rim: 24 "to 26"
Rim width: 27 - 34 mm
Valve Type of Rim Strips: Schrader (car valve)
Weight: approximately 120 to 150g per wheel, depending on the amount used sealing milk
Delivery: 1x roller Yellow Tape (12mm x 9mm), 0.5l milk (about 8 fillings), 2x Freeride Rim Strip 24 "- 26" + valves