NOTUBES Tubeless Kit MTB | 27 mm rim tape
With the already assembled tubeless kits from Stan's NoTubes, a conventional impeller can be converted to operation without a tube - tubeless - without great effort. Simply remove the old rim tape and stick the yellow tape over the spoke holes instead. Then only the valve has to be mounted and the tire put on. The sealing liquid contained in the kit seals smaller punctures while driving, even afterwards and in most cases unnoticed. By eliminating the tube , the rolling resistance is reduced, the flexing work of the tube and the friction between tube and tire are saved! The tire also works noticeably more freely and offers increased traction and improved comfort.
Technical specifications:
Sealing: thanks to the special formula, a hole up to 6.5 mm in size is immediately and permanently sealed
Duration of action: 2-7 months (depending on the intended use )
Quantity: sufficient for approx. 2 tire fillings (each 59 ml, for tires with a width of 1.0-2.4 inches)
Effective range: down to -34 ° C
Environment: made entirely from natural components and therefore very environmentally friendly
Valve type: Sclaverand, 44 mm (French, Presta)
Rim tape: width 27 mm
Weight according to the manufacturer: n / a
Weight weighed: about 330g
Scope of delivery:
1x roll of yellow tape 9 mx 27 mm (sufficient for at least 2 rims)
2x NoTubes Sclaverand valves brass (44 mm)
1x NoTubes Tire Sealant sealing milk bottle (200 ml)