NONPLUS COMPONENTS Hub Set GEN2 Gravel 6-hole 12 x 100 mm / 12x142 mm 24 hole Limited Edition Silver | Shimano 11-speed Road
Three decades of experience in the development and production of hubs leave their mark, albeit a "very slight" one.
Over the years, the head of development at NONPLUS COMPONENTS, Christian Jenny was thus able to accumulate an immense amount of technical and practical knowledge, which led to the production of the first own prototypes in 2016 after finding an investor.
In order to be able to guarantee the precise production of the hubs, the company Frank Präzisionsteile GmbH from Murr in Baden-Württemberg, which is also the investor, took over the production. A little later, in 2018, NON+ was registered as a trademark. Since then, the wheels have not stopped turning at one of the most innovative think tanks for bike components in Germany. New concepts are constantly being developed and patents applied for in order to be able to set new standards in the future.
The NONPLUS for your gravel adventures.
The NONPLUS front hub is the heart of your new, ultra-light wheelset. Despite the low weight, the hub has no restrictions regarding the range of use. The silver anodising not only looks good, it also protects the oversized hub body from corrosion. The whole thing revolves around two high-quality 6803 2RS deep groove ball bearings at the end, which are placed on a 17 mm axle. The Microspalt end caps, which also form a seal against the elements, finish off the hub.
The NONPLUS rear hub is a masterpiece of engineering and unique due to its weight combined with its clearance for almost any cycling application. The silver anodised oversized hub body forms the heart of the hub around which everything revolves. Two load-optimised bearings support the hub body on a 17 mm axle, two further bearings carry the freewheel and the Microspalt end caps keep dirt and water away from the inside of the hub. A brake disc mount that reaches directly to the spoke flange ensures optimal transmission of braking forces. On the opposite side, the patented freewheel mechanism is hidden inside. The unique bevel gearing has a contact surface that is approx. 400 % larger than conventional spur gearing and thus enables maximum power transmission with minimum wear. The special, very elaborately manufactured back of the tooth, together with the hard anodised surface, ensures low abrasion and thus additionally increases the service life. The 45-fold toothing results in a maximum idle travel of 8°. This means that you have propulsion immediately when you need it, e.g. in difficult passages, and you don't lose valuable time in the sprint to the finish.
GEN2
Thanks to high-precision manufacturing and perfect quality control, the second generation hubs do without the previously used adjuster for bearing play. This means you always have a perfectly adjusted hub with smooth, easy running.
Precision and quality
The elimination of disturbing factors such as flex, vacuum effect, spoke tear-out and tolerances, through the highest precision in material selection, manufacturing process and quality assurance. All this makes a warranty period of 4 years possible.
NONPLUS bevel gearing
The unique freewheel mechanism of the NONPLUS hubs has approx. 400% more contact surface than conventional systems and enables maximum power transmission with minimum wear. This is a major advantage over conventional ratchet systems, where the forces are transmitted by the toothed pulleys at specific points rather than over a large area. Special, very elaborately manufactured tooth backs reduce abrasion many times over, and a hard anodising ensures long durability.
Tooth to Tooth
For the perfect ratio of pedal kickback and propulsion, the 1:1 toothing plays a major role. This guarantees direct power transmission via 45 defined detent points without detours from the freewheel to the hub Body.
Simplification
The filigree transition between brake disc mount and flange saves weight and at the same time generates more strength.
Non Vacuum Effect
A unique venting system prevents the occurrence of negative pressure due to temperature fluctuations in the hub. This means that no water is sucked through the ball bearings, resulting in a significantly longer service life and noticeably smoother running of the bearings.
Special sealing
Mircospalt end caps improve the sealing of the individual hub components.
Note: The hub is a high-end product with a focus on minimal weight. The bearings chosen are a small compromise for extra smooth running and maximum speed. The special seal reduces friction, but requires a little more care.
Technical specifications front wheel hub:
Range of use: Gravel, road bike, CX, MTB
Material: anodised aluminium
Axle standard: 12 x 100 mm thru axle
Number of holes: 24 holes
Brake disc mount: 6-hole (IS2000)
Bearing: Industrial deep groove ball bearing (2 x 6803 2RS)
Spoke type: Standard spokes (J-Bend)
max. permissible spoke tension: 1200N
maximum system weight: no restriction
colour: limited edition silver with lasered logos
weight according to manufacturer: 83g
Weight weighed: 84g
technical specifications rear hub:
Range of use: Gravel, road bike, CX, MTB
Material: anodised aluminium
Freewheel body material: aluminium, hard anodised for low wear
Axle standard: 12 x 142 mm thru axle
Number of holes: 24 holes
Brake disc mount: 6-hole (IS2000)
Freewheel compatibility: Shimano HG 11-speed Road ( 11-speed MTB with 1.8 mm spacer)
Freewheel type: bevel gearing, 45-tooth | max. 8° free travel
Bearing: 4x industrial deep groove ball bearings (1 x 17287 2RS, 3x 6803 2RS)
Spoke type: Standard spokes (J-Bend)
max. permissible spoke tension: 1200N
maximum system weight: no restriction
Colour: Limited Edition silver with lasered logos
weight according to manufacturer: 165g
Weight weighed: 167g
Scope of delivery: 1 x NONPLUS COMPONENTS hub set GEN2 Gravel 6-hole 12 x 100 mm / 12x142 mm 24 hole Limited Edition Silver | Shimano 11-speed Road
CERAMICSPEED OSPW System Coated | Dura Ace 9200 / 9250 | Ultegra 8100 / 8150 blackavailable from stock
3M Protection Film 8591 transparent 16,5 m for Frames, Forks etc. | widht 100 mm | transparentavailable from stock