NINER Mountainbike frame 29 "| 27,5" Plus Fully JET 9 RDO Carbon 2017
The JET 9 RDO is the spearhead of Niner in the fully-cushioned cross-country segment and was the first 29er fully frame made of carbon. For the new season, the new JET RDO carbon frame now also offers the possibility to mount 27.5+ "wheels instead of the 29" inch wheels for the first time.
The entire frame has been devised down to the last detail and offers the latest technologies and know-how, which has been taken into account in all frame components from the control tube to the failing. In every detail, Niner asked herself if they could make it even better. And yes, they can!
Whether from the conical fork and tapered control tube (1 1/8-inch to 1.5-inch tapered), through the monocoque construction of carbon fibers to the uniquely forged lower deflection lever, every detail has been considered and optimized by FEM optimization Stress tests and operations on the trails to the optimum. As a result, a stiffer frame construction was created without additional weight. The suspension technology, which has already been tested in the framework of the RIP, is now also offered to JET.
A unique feature is not only the optimized production process, which ensures the highest quality and low weight, but also a rear section made of carbon, which is intended for the wide and enormously sturdy boost (12 x 148 mm) jib system.
The connection between the frame and the damper is ensured by a very stable carbon deflection lever which saves further weight.
As a spring component, a Fox Float Factory EVOL shock absorber with numerous adjustment possibilities and Kashima coating is used.
The in-house CVA suspension technology allows a very efficient suspension, which is active and gentle in any situation over a spring travel of 120 mm. The perfect balance is achieved together with a 120-140 mm suspension fork. A further, convincing feature is the device for internal shifting. Speaking of the circuit: Niner leaves the customer the choice of whether he would like to ride with a single, a double or even a Di2. The frame with PostMount mount now also offers space for tires up to 3.0+ "width when using 27.5" wheels - the possibility for your Traumbike is unlimited!
Frame sizes: S, M, L, XL
Control tube: 1 1/8 - 1.5 inch tapered (IS42 / 28.6 | IS56 / 40)
Saddle tube (internal diameter): 30,9 mm
Seatpost (outside diameter): 34.9 mm
Inner bearing: BSA 73mm
Travel distance: 120 mm
Suitable wheel size: 27.5 "or 29"
Rear axle system: Boost 148 x 12 mm axle
Maximum tire width: 3.0+ "(depending on the manufacturer also smaller)
Colors: Satin Carbon Slate Red - Blaze Yellow
Scope of delivery: frame, Fox Factory EVOL shock absorber with Kashima coating, saddle clamp and axle.