The RIP 9 RDO is Niner's Trailbike flagship par excellence. For more than a decade, the Allround Bike has dominated the international offroad scene. The current version of Niner typically has many innovative innovations. Although the travel shrank by one centimeter to a still impressive 140 mm, however, the in-house CVA suspension was optimized in such a way that this bike has become much more agile not only more suitable for old age but also on technical trails. The sluggishness of the chassis has been improved enormously, especially with heavy bumps and bumps, and now lets the bike fly over the trails. Also in the frame numerous improvements have been incorporated. For example, from a geometry for two impeller sizes, two differently designed frames for 27.5 inches and 29 inches have been created. The reason - the wheels of different sizes each require different frame geometries and suspension kinematics in order to be able to work efficiently. In addition, the frames were reinforced and optimized again at the correspondingly heavily stressed areas. In addition, there is the possibility for the rider to customize the bike to his own preferences and to change the suspension geometry. About GEO FLIP CHIP statistics as Reach, Stack, standover height, steering angle and wheelbase a few steps from the turning of the mount to change the CVA rear section of the damper Wipper. Further details such as the integrated integrated cable routing for the shift and lowerable seatposts as well as the ISCG 05 mount for Bash Guards / chain guides, voluminous frame guards on the down tube and the possibility to mount a drinking bottle even with a small frame size underline the character of a touring enduro bike with killer instinct.
intended use : Enduro, Trail Material: RDO carbon Frame sizes: S, M, L Impeller size: 27.5 " Head tube: 1 1/8 - 1,5 "tapered Headset: tapered semi-integrated (SHIS ZS44 / 28.6 / H8 | ZS56 / 40) Spring travel frame: 140 mm Travel fork: designed for 150 mm forks Fork Offset: optimized for 37 mm Seat tube (inner diameter): 30.9 mm Seat tube (outer diameter): 34.9 mm Derailleur mounting: - Fixing chain guide: ISCG 05 Inner bearing type: 73 mm BSA Q-Factor: 168 mm Disc Brake Mount: Postmount 6 " max brake disc size: 180 mm maximum tire width: 27.5 x 2.6 inches (smaller depending on the manufacturer) Rear axle system: 12 x 148 mm thru-axle BOOST Circuit type: only single drives Cable management: circuit and seatpost inside Colors: Santa Fe Sand; Military Green | Cement Gray or Satin Carbon
Weight according to manufacturer: approx. 3080g (size M, incl. Attachments) Weight weighed: not specified
1x Niner RIP 9 RDO Carbon Fully Frame 1x Fox Factory DPX2 EVOL shock with Kashima Coating 1x Cane Creek Headset ZS44 / 28.6 / H8 | ZS56 / 40 1x Niner saddle clamp 1x Niner 12 x 148 mm Boost thru axle