NINER Framesetset 28" BSB 9 RDO Carbon Cyclocross green | blue 2018
NINER Frame Set 28 "BSB 9 RDO Carbon Cyclocross green | blue 2018
Niners flagship for the Cyclocross world. The BSB 9 RDO, revised for 2018, now comes with front and rear axles as well as FlatMount brake pads. The RDO Carbon Layup does not compromise when it comes to stiffness, durability and driving quality. The Cyclocross-specific geometry ensures agile handling and lets you fly over the routes of this world.
The experience in the construction of lightweight, strong hardtails made of carbon, let the forge located in Colorado completely flow into its cyclocrosser. Therefore, the specific tube shapes of the MTBs are also found in the BOD 9. The special, complex manufacturing process (RDO), which requires less resin through a higher compaction of the material, makes this frame extremely stiff and resilient but flexible in certain areas. The small seat support diameter of 27.2 mm also reduces road vibrations on gravel or rough roads and reduces body fatigue during long races. The ingenious geomotry with a steep control tube angle and short chain struts (only 425 mm) make the Niner BSB 9 extremely agile and agile on the ground. Also with the full carbon fork with tapered fork shaft and axle, the engineers took deeply in the experience. With bonds from the MTB version, it is extremely stiff but still very comfortable. The plug-in axle provides additional precision for the cornering and better braking behavior. In addition, a 12 x 142 mm plug-in axle has now been donated to the frame in order to increase the stiffness in combination with disc brakes. Typically Niner, the PressFit 30 standard for the bottom bracket housing offers full compatibility for single, double and triple drives. The internal cable routing (also DI2 compatible) ensures a clean look and does not interfere with the shoulders of the bike in carrying passages. For all frame sizes it is possible to position two holders for drinking bottles.
The Niner BSB 9 RDO is the ultimate racing machine, not just for the professional Cyclocrosser!
Frame sizes: 47, 50, 53, 56, 59 or 62 cm Material: High-performance RDO Carbon Wheel Size: 28 " Control tube: 1 1/8 - 1.5 "tapered (IS42 / 28.6 | IS52 / 40) Seatpost (internal diameter): 27,2 mm Front derailleur mounting: 34.9 mm, high mount / bottom pull Recommended seat support length: 400 mm Inner bearing: 68 mm PressFit 30 (with adapter compatible with BSA bearings) Disc brakes: FlatMount Max. Brake disc size: 160 mm Front axle: 15 x 100 mm Throttle shaft (Maxle) Rear axle: 12 x 142 mm axle Maximum tire width: 40-622 (depending on manufacturer) Compatible with: 1-, 2- and 3-way drives Compatibility: mechanical circuits, Di2 compatible (accumulator in seat tube) Colors: green blue
Weight: k. A.
Scope of delivery: frame, fork, control unit, expander, ducting, saddle clamp, axle and mounting material