NINER Frame Set 28" BSB 9 RDO Carbon Cyclocross black | white 2018
NINER frame set 28 "BSB 9 RDO Carbon Cyclocross black | white 2018
Niner's flagship for the cyclocross world. The revised for 2018 BSB 9 RDO now comes with quick release front and rear axles and flat mount brakes therefore. The RDO Carbon Layup is no compromise when it comes to stiffness, durability and ride quality. The cyclocross specific geometry ensures agile handling and lets you fly formally over the routes of this world.
The experience in the construction of lightweight, strong hardtails made of carbon, let the luxury manufacturer based in Colorado completely flow into his Cyclocrosser. Therefore, the specific tube shapes of MTBs can also be found in BOD 9. The special, elaborate manufacturing process (RDO) which requires less resin due to a higher compression of the material, makes this frame so extremely stiff and resilient but still flexible in certain areas. The small 27.2 mm seat post diameter also reduces road vibration on gravel or rough roads and reduces body fatigue during long races. The ingenious geometry with a steep head tube angle and short chain stays (only 425 mm) make the Niner BSB 9 extremely agile and agile in the terrain. Even with the full carbon fork with tapered steerer and thru axle, the engineers took deep into the experience box. With bonds from the MTB version, it is extremely stiff, yet very comfortable. The thru-axle provides additional precision for cornering and better braking performance. In addition, the frame has now been fitted with a 12 x 142 mm thru-axle to further increase stiffness in conjunction with disc brakes. Typically Niner, the PressFit 30 standard in the bottom bracket shell offers full compatibility for single, dual and triple actuators. The internal cable routing (also DI2 compatible) ensures a clean look and does not interfere with the shoulders of the wheel in carrying passages. With all frame sizes there is the possibility to position two holders for drinking bottles.
The Niner BSB 9 RDO is the ultimate racing machine, not just for the professional cyclocrosser!
Frame sizes: 56 or 59 cm Material: High-Performance RDO Carbon Impeller size: 28 " Head tube: 1 1/8 - 1,5 "tapered (IS42 / 28.6 | IS52 / 40) Seat tube (inner diameter): 27.2 mm Front derailleur mount: 34,9 mm, high mount / bottom pull Recommended seat post length: 400 mm Bottom bracket: 68 mm PressFit 30 (with adapter compatible with BSA bearings) Disc brake mount: FlatMount Max. Brake disc size: 160 mm Front axle: 15 x 100 mm thru axle (Maxle) Rear axle: 12 x 142 mm thru axle maximum tire width: up to 40-622 (depending on the manufacturer) compatible with: 1-, 2- and 3-speed drives Compatibility: mechanical circuits, Di2 compatible (battery mount in seat tube) Colors: black | white