Niners new flagship for Cyclocross - world.
The experience in the construction of light, strong hardtail carbon, leaving the high-end manufacturer headquartered in Colorado fully integrated into its Cyclo Crosser. Therefore, the specific tube shapes of MTBs also the BSB can be found. 9 The special, complicated preparation process (RDO) that requires by a higher compression of the material less resin, this frame does so extremely strong and rigid in certain areas still flexible.
The small seatpost diameter of 27.2 mm further reduces road vibration on gravel or rough roads and reduces the body fatigue during long races.
The ingenious Geomtrie with a steep head tube angle and short chainstays (only 425 mm), making the Niner BSB 9 in the intended use extremely maneuverable and agile.
Even with the full carbon fork with tapered steerer and 15 x 100 mm thru-axle, the engineers dug deep into their experience crate. With bonds of the MTB version it is extremely rigid yet adapted very comfortable. The floating axle ensures additional precision for cornering and optimum braking. In addition, the frame also has a 12 x 142 mm has now been donated through axle to further increase the stiffness in conjunction with disc brakes.
Typically Niner who PressFit 30 standard in crankset provides full compatibility for single, 2- and 3-fold actuators. The internal cable routing (also DI2 compatible) provides a clean look, and does not interfere with the shoulders of the wheel in carrying sections. For all frame sizes, there is the possibility of two drink bottle holders to position.
The weight of the frame sets was further reduced by the color reduction and extra thin, overpainted Decals by 40-50 grams.
The Niner BSB 9 RDO is the ultimate racing machine, not only for professional cyclo Crosser!
Frame sizes: 47, 50, 53, 56, 59 or 62 cm
Material: High-performance RDO Carbon
Wheel Size: 28 "
Headtube: 1 1/8 - 1.5 "tapered (IS42 / 28.6 | IS52 / 40)
Seat tube (inside diameter): 27.2 mm
Seat tube (outer diameter): 29.6 mm
Front derailleur: 34.9 mm, high mount / bottom pull
recommended seatpost length: 400 mm
Bottom bracket: 68 mm PressFit 30 (with adapter compatible with BSA camps)
Disc brake mount: Post Mount
Max. Disc size: 160 mm
Front: 15 x 100 mm thru-axle (Maxle)
Rear: 12 x 142 mm thru-axle
maximum tire width: 1.75 "(depending on the manufacturer also small)
compatible with 1-, 2- and 3-fold drives
Compatibility: mechanical circuits, Di2 compatible (battery receptacle in the seat tube)
Color: green | greener
Weight: 970g (size 56, frame only)
Delivery: Frame, fork, headset, Expander, derailleur hanger, saddle clamp, thru-axle and mounting material