NEWMEN Wheelset 29 "Evolution SL A.30 Aluminum Gen2
This wheelset offers you pure all-mountain fun. The 30 mm inner width of the rim is the optimum combination of width and weight. It allows lower air pressure and makes your bike safer, more comfortable and more playful.
Due to the special rim profile, with the completely edge-free outer contour, this rim is very light and at the same time resistant to external forces. The issued rim flanks are more resistant to dents than conventional straight rim flanks and give the tire a rounder shape and thus more curve grip.
For the Gen2 hubs Newmen has put the user-friendliness in the foreground. It is no longer necessary to adjust the axial bearing clearance. The bearings are pre-tensioned and precisely pressed. In conjunction with the Sapim D-light spokes you are prepared for everything and can spend the time saved on your favorite trail longer.
With the toothed wheel freewheel, all teeth are always in full use and thus prevent the dreaded kick into the void, which can certainly occur under heavy loads in pawl systems.
Despite the relatively low weight of the hubs, safety was not saved. It would be better to use a bit more material in the neuralgic areas, such as. eg at the transition between brake disc and spokes receptacle, as risking a defect.
All Newmen products are developed and produced in Germany. Thus, the manufacturing process can be optimized at any time and a permanently high quality can be guaranteed.
intended use : Tour, Marathon, All Mountain, Trail
Impeller size: 29 "(ETRTO: 622 x 30 mm)
Rim type: clincher (wire and folding tire)
Brake type: only for disc brake
Brake disc mount: 6-hole (IS2000)
Material: aluminum, steel
Inner width: 30 mm
External width: 34 mm
Rim height: 21 mm
Number of holes: 28 holes
axle type front: 15x100 mm thru-axle or 15x110 mm thru-axle BOOST
Rear axle type standard: 12x142 mm thru-axle or 12x148 mm thru-axle BOOST
Front bearing : 2x industrial deep groove ball bearings
Rear bearing : 4x industrial deep groove ball bearings
Seal: smooth-running sliding seals
Freewheel Compatibility: 8-, 9-, 10-, 11-speed MTB Shimano | SRAM, 11-, 12-speed SRAM XD or 12-speed Shimano Micro Spline
Freewheel type: 2 toothed pulleys, 36 detents
Spokes: Sapim D-Light / Straightpull (black)
tubeless capable: yes
Recommended tire width: 57-89 mm
maximum rider weight: 125 kg (driver, bike, clothes and possibly luggage)
Finish: anodised matt
Color: black with gray logos
Weight according to manufacturer: from 1760g
Weight weighed by yourself: -
Scope of supply: 1x NEWMEN wheelset 29 "Evolution SL A.30 aluminum Gen2