shipping country:
    header image

    NEWMEN Wheelset 29" E-Bike Evolution E.30 Aluminium Gen2 | BOOST

    Item no.:

    Product weight:2072g
    728,00 €
    Finance from 20.5 EUR / Monat
    UVP: 728,00 €
    including 19% VAT. , free shipping in DE / shipping time info
    • available from stock

    Article details

      NEWMEN Wheelset 29 "E-Bike Evolution E.30 Aluminum Gen2 | BOOST

      With this wheelset, you can finally use your E-MTB as you want, because all components are extra reinforced and adapted to the much higher loads. The stable aluminum rim with 30 mm inner width corresponds exactly to the dimensions of the NEWMEN Evolution SL A.30 test winner rim.
      For the higher loads in E-MTB use, the wall thicknesses of the Evolution EG30 rim in the nipple area and on the side walls were additionally increased, which again improves the resistance to dents by 40%.
      With the Gen2 hubs, you no longer need to worry about adjusting the axial bearing clearance. The long-life bearings are already stress-free and precisely pressed in at the factory. This evolution has resulted in a high level of user-friendliness. The time saved you can spend better on your favorite trail.
      The e-bike version uses only larger, double sealed bearings with a special lubricant. In addition, more material was used at neuralgic sites to compensate for the larger loads and to avoid defects and a 17mm axle provides excellent rigidity.
      With the extra-reinforced pulley freewheel, all teeth are fully in use at all times and thus prevent the dreaded kick into the void, which can certainly occur under high loads in pawl systems.

      All Newmen products are developed and produced in Germany. Thus, the manufacturing process can be optimized at any time and a permanently high quality can be guaranteed.

      Technical specifications:

      intended use : MTB E-Bike, Tour, All Mountain, Trail
      Impeller size: 29 "(ETRTO: 622 x 30 mm)
      Rim type: clincher (wire and folding tire)
      Brake type: only for disc brake
      Brake disc mount: 6-hole (IS2000)
      Material: aluminum, steel
      Inner width: 30 mm
      External width: 34 mm
      Rim height: 21 mm
      Number of holes: 28 holes
      axle type front: 15x110 mm thru-axle BOOST
      axle type back: 12x148 mm thru-axle BOOST
      Front bearing : 2x industrial deep groove ball bearings
      Rear bearing : 4x industrial deep groove ball bearings
      Seal: labyrinth rubber seals
      Freewheel Compatibility: 8-, 9-, 10-, 11-speed MTB Shimano | SRAM or 11-, 12-speed SRAM XD
      Freewheel type: 2 toothed washers, 30 detents
      Spokes: Sapim Strong Straightpull (black)
      tubeless capable: yes
      Recommended tire width: 57-89 mm
      maximum system weight: 180 kg (driver, bike, clothing and possibly luggage)
      Finish: Shotpeen Black Anodized
      Color: black with gray logos

      Weight according to manufacturer: from 2072g
      Weight weighed by yourself:


      1x NEWMEN front wheel 29 "Evolution E.30 aluminum Gen2 | 15x110 mm thru-axle BOOST
      1x NEWMEN rear wheel 29 "Evolution E.30 aluminum Gen2 | 12x148 mm thru-axle BOOST